If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 79
(rack server) or
server).
Ê Remove the air duct as described in section
on page
100.
Ê Remove the system fan holder as described in section
system fan holder" on page
I
Removing the front cover is not required in order to replace an accessible
drive.
12.4.3 Removing an accessible drive
Ê Remove all cables from the accessible drive.
Ê Remove the defective accessible drive as described in section
an accessible drive" on page
12.4.4 Installing an accessible drive
Ê Install the new accessible drive into the empty slot as described in section
"Installing an accessible drive" on page
Ê Reconnect all cables to their original accessible drive connectors as
described in section
12.4.5 Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page
102.
TX300 S7 / RX350 S7
"Removing the side cover" on page 88
389.
677.
"Cabling the accessible drive" on page
390.
Upgrade and Maintenance Manual
Accessible drives
77.
"Removing the top cover"
"Removing the system air duct"
"Removing the
658.
"Installing the system
"Installing the system air duct"
(tower
"Removing
667.
685