Panasonic NC-ZA1 Operating Instructions Manual page 40

How to Clean

Decalcification cycle:

Use this cycle occasionally and/or when the display shows

This decalcification cycle enables simple and effective descaling. This programme runs in 2 phases and it takes approximately

11 minutes and should not be interrupted. When display shows

1

Press

2

Select "descaling programme".

(First phase)

3

Fill the water tank with 250 mL of water and add 125 mL of descaling

agent, then press

4

Press

• Empty the drip tray before starting the cleaning cycle.

EN40

(Continued)

on the main menu.

.

to start decalcification cycle. (Approx. 9 min.)

.

, press

and follow steps from 3.

Note

• If the filter cartridge is set in the water tank, remove it before this

programme starts.

Note

• If

is pressed, the display will return to the previous display.

Note

• If

is pressed, the display will return to the previous display.

Note

• If

is pressed during descaling, the

display indicates to empty the drip tray. To

continue the descaling cycle, press

.