Table of Contents
Insert the Steering Rod
It's easiest to accomplish this step with
the Ram slightly tipped to it's side. Have
a second person hold the Ram while
inserting the steering rod.
1. Remove the screw and nut from the
steering wheel, and keep it close by,
you will need to hold the steering rod
in place.
1
2. Insert the long end of the steering rod
through the steering rod hole on the
flat axle rod through the hole on the
underside of the truck body.
3. The short, curved end of the steering rod
should insert through the round rod on
the front axle.
4. While holding the steering column in
place, carefully turn the truck back to the
standing position.
5. Insert the screw you set aside in step 1
through the end of the steering rod to hold
it in place.
Attach the Steering Wheel
6. Attach the wire connectors coming
from the steering wheel hole to the wire
connector coming from the bottom of the
steering wheel.
7. Hold the steering rod, and remove the
screw from the end of the steering rod.
8. Align the holes at the end of the steering
rod with the holes in the steering wheel.
9. Insert the screw through the holes.
10. Fasten the steering wheel to the steering
rod by placing the nut on the end of the
screw, and tighten.
6
Use the steering wheel screw to
hold the steering column in place
while connecting the wires.
5
10
8
9
3
2
10
- Quick Links:
- Services, Repairs and Parts
Hide quick links:
Table of Contents
