Table of Contents
Attach the Rear View Mirrors
1. Insert the mirror into the
pin of the mirror bracket
on the RAM body.
2. Insert the long (1½")
screw through the hole
into the bracket.
3. Fasten by placing the
small nut on the end of the
screw, and tighten the nut.
Attach the Battery to the Motor
4. Attach the two blue battery
connectors. Note: You will only
need to connect the battery to
the motor one time.
Only use the KidTrax toys 12V
charger included with the RAM
3500 (Input: AC 120V, 60Hz
Output: DC 6V).
Attach the Roll bar
5. Route the wire connector coming
from the bottom of the roll bar
down into the roll bar hole,
through to the connector under
the truck bed.
6. Working from the underside of
the truck bed, attach the wire
connectors. Be sure the wire
connectors are tucked under the
truck bed
7. Push the four posts on the
bottom of the roll bar into
the four holes in the truck bed
until they snap into place.
11
2
1
3
7
7
4
6
7
5
7
- Quick Links:
- Services, Repairs and Parts
Hide quick links:
Table of Contents
