Table of Contents
Attach the Rear Wheels
1. Slide the rear wheel onto the end of the axle, fitting the back
of the rear wheel into the gear box.
2. Insert a washer over the axle. Using the included hex wrench,
fasten the nut on the end of the axle and tighten. The axle
may need to be shifted left or right to be evenly distributed so
for the tires to fit properly.
3. Align the four tabs of the hubcap with the slots in the front of
the wheel and press into place.
4. Repeat steps 1-4 on the opposite rear axle.
3
2
Check to make sure the motor is
placed under the square tubing
before attaching the wheels.
Attach the Front Wheels
1. Insert the washer over the end of front axle.
2. Slide the wheel over the axle, followed by a second washer.
3. Using the included hex wrench tool, fasten the nut on the end
of the axle and tighten.
4. Align the three tabs of the hubcap with the slots in the front of
the wheel and press the hubcap into place.
5. Repeat steps 1-4 on the opposite front axle.
3
4
7
1
1
2
3
4
5
- Quick Links:
- Services, Repairs and Parts
Hide quick links:
Table of Contents
