Assembly; Insert The Rear Axle; Insert The Gear Boxes - RAM 3500 Dually KT1100WM Owner's Manual

It's easiest to perform the following steps from the underside of the RAM body. To avoid scratching the

body, perform all assembly steps on a soft surface such as a carpet or cardboard.

1. Carefully turn the Ram body

upside down.

2. Remove the nuts and

washers from the axle, and

save them for the wheel

attachment (page 7).

3. Align the stop tabs on the

axle with axle hole to allow

the axle to easily slide

through the axle tube.

4. Slide the axle through the

axle hole making sure that

each axle extends equal

length on both sides of

the axle tube.

5. Slide the gear box onto

the end of the axle.

6. Be sure the gear box fits

correctly into the gear box

stop. The motor should be

completely inserted under

the axle and square tubing

as shown.

7. Repeat step 1-2 for the

opposite gear box.

5

4

axle should

be an equal

length on

each side

5

3

6