Table of Contents
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Copyright(C) 2010 D-Link Corporation. All rights reserved.
DGS-3700-12:5#
DGS-3700-12:5#
DGS-3700-12:5# download cfg_fromTFTP 10.41.44.44 src_file c:\cfg\setting.txt
Command: download cfg_fromTFTP 10.41.44.44 src_file c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DGS-3700-12:5#disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
DGS-3700-12:5#
DGS-3700-12:5##-----------------------------------------------------------------
DGS-3700-12:5##
Saving configurations and logs to NV-RAM...... Done.
**********
* Logout *
**********
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a DHCP
client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To stop the autoconfiguration function:
DGS-3700-12 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.00.B023
End of configuration file for DGS-3700-12
Use this to deactivate autoconfiguration from DHCP.
disable autoconfig
This command is used to instruct the Switch not to accept autoconfiguration
instruction from the DHCP server. This does not change the IP settings of the
Switch. The ipif settings will continue as DHCP client until changed with the
config ipif command.
None.
Only Administrator and Operator-level users can issue this command.
Page | 59
Chapters
Table of Contents
