Table of Contents
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
Serial Number
System Name
System Location
System Uptime
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
Telnet
Web
SNMP
SSL Status
CTRL+C ESC q
Quit
show device_status
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch status:
DGS-3700-12G:5#show device_status
Command: show device_status
Internal Power
External Power
Right Fan
DGS-3700-12G:5#
show environment
Purpose
Syntax
Description
Parameters
: DGS-3700-12G Gigabit Ethernet Switch
: 00-21-91-AF-3C-B0
: 10.73.60.100 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.00.B002
: Build 2.00.B023
: A1
: P4HU19A000009
:
:
: 0 days, 0 hours, 0 minutes, 35 seconds
:
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
: Disabled
SPACE n
Next Page
Used to display the current Switch power, temperature and fan status.
show device_status
This command is used to display status of both the Switch's internal and external
power, temperature, and fan status.
None.
None.
: Active
: Fail
: OK
To display the device's hardware status.
show environment
This command is used to display the device's internal or external power and internal
temperature status.
None.
ENTER
Next Entry
a
Page | 28
All
Chapters
Table of Contents
