Makita DHR242 Instruction Manual
Cordless combination hammer
Hide thumbs
Also See for DHR242:
- User manual ,
- Instruction manual (84 pages) ,
- Instruction manual (16 pages)
Related Manuals for Makita DHR242
Summary of Contents for Makita DHR242
- Page 1 INSTRUCTION MANUAL Cordless Combination Hammer DHR242 DHR243 012621 IMPORTANT: Read Before Using.
-
Page 2: Specifications
The vibration total value (tri-axial vector sum) determined In observance of European Directive according to EN60745: 2002/96/EC on waste electric and electronic equipment, 2006/66/EC on Model DHR242 batteries and accumulators and waste Work mode : hammer drilling into concrete batteries and accumulators and their Vibration emission (a ) : 13.5 m/s... -
Page 3: General Power Tool Safety Warnings
Unmodified plugs and matching outlets will reduce risk of electric shock. EC Declaration of Conformity Avoid body contact with earthed or grounded Makita declares that the following Machine(s): surfaces such as pipes, radiators, ranges and Designation of Machine: refrigerators. There is an increased risk of Cordless Combination Hammer electric shock if your body is earthed or grounded. - Page 4 will reduce personal injuries. and the work to be performed. Use of the power 12. Prevent unintentional starting. Ensure the tool for operations different from those intended switch is in the off-position before connecting could result in a hazardous situation. to power source and/or battery pack, picking Battery tool use and care up or carrying the tool.
- Page 5 Under normal operation, the tool is designed attention right away. It may result in loss of to produce vibration. The screws can come your eyesight. loose easily, causing a breakdown or accident. Do not short the battery cartridge: Check tightness of screws carefully before Do not touch the terminals with any operation.
-
Page 6: Functional Description
Lithium-ion batteries with a star marking are equipped FUNCTIONAL DESCRIPTION with a protection system. This system automatically cuts off power to the tool to extend battery life. The tool will automatically stop during operation if the tool CAUTION: and/or battery are placed under one of the following Always be sure that the tool is switched off and the •... - Page 7 When the reversing switch lever is in the neutral position, Selecting the action mode the switch trigger cannot be pulled. Rotation with hammering CAUTION: 1. Rotation with Always check the direction of rotation before hammering • operation. 2. Lock button 3.
-
Page 8: Torque Limiter
this time, turn the tool on or turn the chuck by hand 1. Bit shank in the symbol position and then rotate the 2. Bit grease action mode changing knob. Forcing the action mode changing knob may cause tool damage. Torque limiter The torque limiter will actuate when a certain torque level is reached. -
Page 9: Operation
Depress the lock button and rotate the action mode OPERATION changing knob to the symbol. Then make sure that the bit is securely held in place by turning it slightly. Hammer drilling operation 012633 012634 Depth gauge Set the action mode changing knob to the symbol. - Page 10 Chipping/Scaling/Demolition 1. Quick change chuck for SDS-plus 2. Change cover line 3. Change cover 012690 012686 1. Spindle Set the action mode changing knob to the symbol. 2. Quick change Hold the tool firmly with both hands. Turn the tool on and drill chuck apply slight pressure on the tool so that the tool will not 3.
-
Page 11: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885236A226...