Table of Contents
Diagnosis
7
7.2 Monitor value
You can use the monitor value menu to view the set and actual values for the heating system. The
set value will be displayed first and then the actual value. The values displayed for monitoring
purposes vary depending on the system installed.
If the values to be displayed do not all fit on the screen, they are displayed as a list. The
list can be moved up or down by turning rotary selector.
DIAGNOSIS\MON. VALUE
Boiler / burner
MCM10/cascade
1)
Boiler:
Hybrid
1)
Heat generator
Pump module
Low loss header
DHW
Heating circuit 1
2)
Solar
2)
Module UM10
2)
Wireless transm.
2)
Bus users
Table 20 Navigator for service menu DIAGNOSIS\MONITOR VALUE
1) the monitor values for each boiler / heat generator are depicted in their own screen. Call up the monitor
values for the next boiler by turning the rotary selector. Symbol present = the corresponding function is
active. Explanation of symbols
2) Not possible or not available with boilers with UBA1.x or DBA.
48
Other information
Only in conjunction with MCM10 (instead of "boiler/burner")
Only in conjunction with MCM10 (instead of "boiler/burner")
Only in association with HM10 (in place of "boiler/burner")
Only in association with HM10 (in place of 'boiler/burner')
2)
Values are displayed for additional heating circuits,
if these are installed.
for solid fuel boiler; EV2 = external locking (entry)
FB = strength of the wireless signal
Tab. 21, page 49.
Logamatic EMS – 6 720 801 387 (2011/05)
Hide quick links:
Table of Contents
