Daikin EGSQH10S18AA9W User Reference Manual page 7
Altherma ground source heat pump
Hide thumbs
Also See for EGSQH10S18AA9W:
- Service manual (168 pages) ,
- Installer's reference manual (96 pages) ,
- Installation manual (28 pages)
Table of Contents
If...
Then the temperature control is...
Room temperature is
Room thermostat
listed under:
control.
[6.1]:
> Information
> Sensor information
Go to next step to
check if leaving
water set point and
room temperature
set point are
linked.
Thermostat main A is
External room thermostat control.
listed under:
[6.5]:
> Information
> Actuators
Else
Leaving water temperature control.
5 Only for room thermostat control: Go to the main leaving water
temperature home page (LWT main) and check the following:
Is displayed
Then leaving water set point and room
next to the
set point?
Yes
NOT linked.
You can set the leaving water set point on
the home page.
No
Linked by their preset values. You can set
the preset values in the menu structure.
Room thermostat control
Room thermostat control means that you control the following:
▪ Room temperature of the main zone
▪ Leaving water temperature of the main zone
Room temperature of the main zone
To control the room temperature of the main zone, you can do the
following:
You can...
Read out the actual and desired room
temperature.
Temporarily overrule the room temperature
schedule.
Change the mode from scheduled to preset
value.
If you do this, you also have to define (in the
menu structure):
▪ Preset values
▪ Overrule period (Temperature lock)
Select which room temperature schedule
you want to use.
Program schedules.
Define preset values that are used by the
room temperature schedule, and when you
change the mode from scheduled to preset
value.
See also:
▪
"Using the room temperature home page" on page 8
▪
"To set the overrule period" on page 9
▪
"4.7 Preset values and schedules" on page 15
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P3517491 – 2013.06
Main zone
Additional zone
(if any)
External room
thermostat control.
temperature set point are...
Location
Room temperature
home page
Room temperature
home page if user
profile = Detailed
Menu structure
Leaving water temperature of the main zone
To control the leaving water temperature of the main zone, you can
do the following:
You can...
Read out the desired leaving water
temperature.
Adjust the leaving water temperature.
Condition: Leaving water set point is NOT
linked with the room temperature set point.
Only change this if the desired room
temperature cannot be reached.
Define preset values.
Condition: Leaving water set point is linked
with the room temperature set point.
Only change this if the desired room
temperature cannot be reached.
See also:
▪
"Using the leaving water temperature home pages (main +
additional)" on page 9
▪
"4.7 Preset values and schedules" on page 15
Leaving water temperature control
Leaving water temperature control means that you only control the
leaving water temperature. To control the leaving water temperature,
you can do the following:
You can...
Read out the desired leaving water
temperature (main + additional).
▪ Adjust/overrule
the
leaving
temperature (main).
▪ Adjust the leaving water temperature
(additional).
Select which leaving water temperature
schedule (main + additional) you want to
use.
Program leaving water temperature
schedule (main + additional).
Define preset values that are used by the
leaving water temperature schedule (main).
See also:
▪
"Using the leaving water temperature home pages (main +
additional)" on page 9
▪
"4.7 Preset values and schedules" on page 15
4 Operation
Location
Leaving water
temperature home
page (main)
Menu structure
Location
Leaving water
temperature home
pages (main +
water
additional)
Menu structure
User reference guide
7
Table of Contents
