Table of Contents
Outdoor Unit (50 / 52 / 58 / 68 / 75 Class)
2.4
Removal of Fan Motor
Procedure
Step
" Remove the fan motor
lead wire connector.
1
Remove the propeller
fan by removing the
washer-fitted nut.
2
Remove the fan motor.
Remove 1 screw of the
fan motor mount.
3
Disconnect the lead
wire by releasing the 2
clamps fixing the wire.
Remove 4 screws of
the fan motor.
248
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Washer-fitted nut
(Backside)
SiE12-411
Points
" For reassembling, align
mark of propeller fan with
D-cut section of motor shaft.
" Mount the propeller fan while
positioning ! mark to the
top.
" When reassembling, fix the
lead wire to avoid contact
with the propeller fan.
Removal Procedure
Hide quick links:
Table of Contents
Troubleshooting
