Summary of Contents for Healthrider Softrider S600 HRTL14981
Page 1
¨ Model No. HRTL14981 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing com- plete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfaction through direct assistance from our factory.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Keep the power cord and the surge protector that all users of this treadmill are adequately away from heated surfaces.
Page 4
DANGER: other than the procedures in this manual Always unplug the power should be performed by an authorized service cord immediately after use, before cleaning representative only. the treadmill, and before performing the main- tenance and adjustment procedures de- 25. The treadmill is intended for in-home use scribed in this manual.
BEFORE YOU BEGIN Congratulations for purchasing the SOFTSTRIDER additional questions, please call our Customer Service S600ª treadmill by HealthRider. The SOFTSTRIDER Department toll-free at 1-800-999-3756, Monday S600 offers an impressive array of features that will through Friday, 6 a.m. until 6 p.m. Mountain Time help you to achieve your fitness goals in the conve- (excluding holidays).
SETTING UP THE TREADMILL Set-up requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is set up. No tools are required. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
GROUNDING INSTRUCTIONS THE PERFORMANT LUBE WALKING BELT electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge PERFORMANT LUBE , a high-performance lubricant.
CONSOLE OPERATION Note: If there is a thin sheet of clear plastic on the face of the console, remove it. will provide continuous exercise feedback. And with the built-in pulse sensor, you can measure your heart rate before, during or after your workout. The console also offers six preset workout programs: four programs au- tomatically control the speed of the treadmill and two programs automatically control the incline of the tread-...
Page 9
example, the speed will gradually increase during DIAGRAM OF THE CONSOLE the first half of the program, and then gradually decrease during the last half. Refer to the drawing at the top of page 8. N. SELECT ButtonsÑThese buttons are used to make various selections on the console.
Page 10
Press the START button or the SPEED + button. HOW TO USE THE MANUAL MODE A moment after the button is pressed, the walking belt will begin to move at 1.0 mph. Hold the hand- Insert the key into the console. rails and begin walking.
Page 15
The SPEED display will show HOW TO USE THE HAND PULSE SENSOR an ÒEÓ (for english miles) or an ÒMÓ (for metric kilometers). To change the unit of measure- To measure your ment, press the SPEED + heart rate, stand on button.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
TROUBLE-SHOOTING AND MAINTENANCE Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM SOLUTION 1.
Page 18
PROBLEM SOLUTION 4. The walking belt is a. If the walking belt has shifted to the off-center or slips left, first remove the key and UNPLUG when walked on THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counter- clockwise, 1/4 of a turn each.
CONDITIONING GUIDELINES accessible carbohydrate calories for energy. Only after WARNING: the first few minutes does your body begin to use Before beginning this stored fat calories for energy. If your goal is to burn fat, or any exercise program, consult your physi- adjust the speed and incline of the treadmill until your cian.
Page 20
PART LISTÑModel No. HRTL14981 R0399A No. Qty. Description No. Qty. Description No. Qty. Description Rear Roller On/Off Switch Photo Switch Wire Isolator Circuit Breaker Frame Motor Bracket Handrail Endcap Right Endcap Hood Bracket Clip Motor/Pulley/Fly./Fan Left Endcap Handrail Assembly Hood Bracket (long) Endcap Pad Walking Platform Power Supply w/Clips...
LIMITED WARRANTY WHAT IS COVEREDÑThe entire HealthRider ¨ SOFTSTRIDER S600ª treadmill (ÒProductÓ) is warranted to be free of all defects in material and workmanship. WHO IS COVEREDÑThe original purchaser or any person receiving the Product as a gift from the original purchaser. HOW LONG IS IT COVEREDÑICON Health &...