Table of Contents
5. Confirm that the version of the system firmware that is running is that of the
firmware applied at the XSCF Shell command line by using the version(8)
command.
Web browser operation
■
For information about using the XSCF Web, see
1. Start the XSCF Web.
https://manual.host /(Specify the host name or IP address of XSCF)
2. The login window of the XSCF Web console is displayed. Please enter an XSCF
user account and password.
3. Select [Utility]-[Firmware Update] to display the menu.
4. Import XCP.
a. Display the XCP import window.
b. Following instructions in the window, specify the firmware program
5. If complete message is displayed, the XCP importing has ended. Perform the
firmware update.
The XSCF firmware is downloaded and applied, and the OpenBoot PROM
firmware is downloaded.
a. Display the XCP update window. (The version of the imported XCP
b. Make a selection for the firmware version check. Confirm whether or not it
c. Make a selection for the firmware update. Following instructions in the
8-18
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
(tar.gz) file and import XCP to the system.
(The update is not performed at this point.)
firmware and the version of the firmware currently running has already
displayed in the screen.)
is possible to update to the new firmware version.
window, update the firmware.
At this time, the XSCF will reset and the XSCF session will disconnect, so
please connect the XSCF again. Only the application of the XSCF firmware is
completed.
Chapter
9.
Table of Contents
