Table of Contents
Enabling or Disabling the Logging of Active Directory Authentication
and Authorization Diagnostic Messages
■
1. Use the showad(8) command to display the log detail level.
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: none
2. Use the setad(8) command to set the log detail level.
XSCF> setad logdetail trace
XSCF> setad logdetail none
3. Use the showad(8) command to confirm the log detail level.
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: trace
Display the Diagnostic Messages and Clear the Log File
■
1. Use the showad(8) command to display the log detail level.
XSCF> showad
dnslocatormode: enabled
expsearchmode: enabled
state: enabled
strictcertmode: enabled
timeout: 10
logdetail: trace
2-68
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
Command operation
Table of Contents
