Table of Contents
3. Use the setdomainmode(8) command to set the CPU operational mode.
ID 0.
XSCF> setdomainmode -d 0 -m cpumode=compatible
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
4. Use the showdomainmode(8) command to confirm that the CPU Mode is
compatible.
Note – Restart the domain to apply the settings to the domain. You may set the
initial diagnostic level, enable or disable the host watchdog function, break signal,
automatic boot, and CPU operational mode.
:max
-> -
:on
-> -
:on
-> -
:auto
-> compatible
:max
:on (host watchdog: available
:on (autoboot:on)
:compatible
Break-signal:non-receive)
Chapter 2
Setting Up XSCF 2-189
Table of Contents
