Preface v Technical Support v Software Resources vi Accessing Documentation vi Fujitsu Welcomes Your Comments vii General Information About XCP 1091 1 What’s New in XCP 1091 1 Active Directory and LDAP/SSL 2 Configuring XSCF for Active Directory Support 3...
Page 4
Solaris OS Issues Fixed in Solaris 10 5/09 24 Solaris Issues Fixed in Solaris 10 10/08 25 Software Documentation Updates 26 Identifying Degraded Memory in a System 30 SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
XCP version are subsequently updated. You must therefore check the manuals for the latest XCP version in addition to those related to the XCP version you are using. Global Site http://www.fujitsu.com/sparcenterprise/manual/ Japanese Site http://primeserver.fujitsu.com/sparcenterprise/manual/ North American Site https://download.computers.us.fujitsu.com/...
SPARC Enterprise M3000 server documentation set. The documentation set is available for download from the following website: Global Site http://www.fujitsu.com/sparcenterprise/manual/ Japanese Site http://primeserver.fujitsu.com/sparcenterprise/manual/ North American Site https://download.computers.us.fujitsu.com/ vi SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Sun Microsystems Software (for Solaris OS, etc.) Related Manuals http://docs.sun.com/ Fujitsu Welcomes Your Comments If you have any comments or requests regarding this document, or if you find any unclear statements in the document, please state your points specifically on the form at the following URL.
Page 8
SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
General Information About XCP 1091 This section describes the general information about XCP 1091. “What’s New in XCP 1091” on page 1 ■ “Supported Firmware and Software” on page 4 ■ “Updating to XCP 1091” on page 6 ■ “Functionality Issues and Limitations” on page 6 ■...
1. Microsoft and Active Directory are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
An administrator group has platadm, useradm, and auditadm privileges associated with it. An operator group has platop, and auditop privileges associated with it. To configure a custom group, both group name and privileges are required. For each type of group, up to five groups can be configured. A user assigned to more than one group receives the sum of all privileges associated with those groups.
XCP 1091 or later Solaris 10 10/08 or later Note – XCP 1080 is the first XCP release for the SPARC Enterprise M3000 server. Note – 8GB DIMM is supported in XCP 1081 or later. For XCP, you can download the latest files of firmware at the following websites.
Japanese Site: http://primeserver.fujitsu.com/sparcenterprise/download/firmware/ Many web browsers support the XSCF Web. The browsers in have TABLE 2 demonstrated compatibility with the XSCF Web through testing. For other information about XSCF Web, see “Notes on XSCF Web” on page Tested Web Browser Versions...
If the specified timeout is too brief for the configuration, the login process or ■ retrieval of user privilege settings could fail. In such case, specify larger value for the timeout and then try again. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
NTP server as XSCF is using For details on NTP server, contact a service engineer. For details on NTP settings, refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide. Notes on the NTP Server Referring to the Local Clock When the NTP server which XSCF refers to is referring to the server's own system time (local clock), and when the address of "127.127.1.0"...
Page 16
Solaris OS. To enable the change, restart of the NTP daemon is required. When you change the address of the local clock of an NTP server, make sure in advance that it has no impact on other NTP clients. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
When you moved the on-screen horizontal frame up or down to change the frame height, do not use the [Monitor Msg Show/Hide] button. To use XSCF Web on the SPARC Enterprise M3000 server which is installed the ■ XCP 1080, disable the cache function of your browser. If you leave the browser cache function enabled, the old cached data might be displayed.
At this time the restoredefaults(8) command is not supported. ■ At this time the -e, -l, -P options of the snapshot(8) command are not ■ supported. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Notes on DVD Drive and Discs See the "Notes on DVD Drives and Discs in SPARC Enterprise" on the website below before using the CD/DVD discs in the standard DVD drive mounted in this server. URL: http://primeserver.fujitsu.com/sparcenterprise/manual/ Information About Hardware...
RCI function or the automatic power control system (APCS). For details, see the "Limitations and Cautions" in "Preface" of the SPARC Enterprise M3000 Server Service Manual. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Hardware Documentation Updates This section contains late-breaking hardware information that became known after the documentation set was published and corrections in the SPARC Enterprise M3000 server hardware documentation. lists known documentation updates. TABLE 3 Hardware Documentation Updates TABLE 3 Title Page Number Update SPARC Enterprise...
This section contains information about XCP issues. , and list TABLE 4 TABLE 5 TABLE 6 issues you might encounter, depending upon which XCP release you are using. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Known Issues and Workarounds in XCP 1091 lists known XCP issues and possible workarounds in XCP 1091. TABLE 4 Known Issues and Workarounds in XCP 1091 TABLE 4 Description Workaround RTIF1- In setsnmp addv3traphost, when the No workaround is available. 080725-001 authentication failed due to the reasons such Confirm that the SNMP trap host is working...
Page 24
For how to use the loadcert console 091105-001 the usage of the setad(8) command and the operand of the setad(8) command and the setldapssl(8) command. setldapssl(8) command, see the manual page. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
XCP Issues Fixed in XCP 1091 lists XCP issues fixed in XCP 1091. TABLE 5 XCP Issues Fixed in XCP 1091 TABLE 5 Description Workaround RTIF1- While XSCF is running, a process may go Check that XSCF is started. If not started, stop 070418-009 down, a watchdog timeout may occur, or a the domain and then execute the system power...
[user] operand is optional but will fail if a Specify the user operand to execute the [user] operand is not included when other password(8) command when you specify options are specified. other options. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Page 27
1091 XCP Issues Fixed in Releases Earlier Than XCP (Continued) TABLE 6 Description Workaround RTIF1- Power failure at the commercial AC supply No workaround is available. 081016-001 connector to the UPS does not send notification/send trap. RTIF1- In Internet Explorer 6 or 7, clicking on the Log back into the browser interface and use 081016-003 [Reset] button then the [OK] button from the...
Page 28
WARNING: /pci@7,700000: FCODE map- in doesn't match decoded register type; And when you execute the showstatus(8) command, "Degraded" might be indicated to the FRU which has installed the relevant card. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Solaris OS Issues and Workarounds This section contains information about Solaris OS issues. TABLE 7 TABLE 8 TABLE 9 list issues you might encounter, depending upon which Solaris OS TABLE 10 release you are using. Solaris OS Issues and Workarounds for All Supported Releases lists Solaris OS issues that you might encounter in any supported release of TABLE 7...
Page 30
6668237 After DIMMs are replaced the corresponding Use the following commands: DIMM faults are not cleared on the domain. # fmadm repair fmri|uuid # fmadm rotate SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Use kmdb instead of kadb. causes the system not to boot. 6765239 If a SAS device containing multiple SAS Use a FUJITSU SAS card targets is connected to the onboard external (SE0X7SA1F/SE0X7SA1X). Alternatively, SAS interface, it will not work properly. The...
Sun Quad-port Gigabit Ethernet Adapter UTP This has been fixed in patch 139570-01. (QGC) & Sun Dual 10 GigE Fiber XFP Low Profile Adapter (XGF) NICs might panic under high load conditions. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Solaris OS Issues Fixed in Solaris 10 5/09 (Continued) TABLE 9 CR ID Description Workaround 6689757 Sun Dual 10 GigE Fiber XFP Low Profile This has been fixed in patch 139570-01. Adapter (XGF) with a single or improperly installed XFP optical transceivers might cause [Workaround] the following error to show on the console: Check and make sure that both XFP optical...
The following description will be added in DESCRIPTION: setdualpower feed(8) The dual power feed mode cannot be used with 100V power on command the M4000/M5000 servers. SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Page 35
Software Documentation Updates (Continued) TABLE 11 Title Page Number Update SPARC Enterprise The following description will be added in EXTENDED sethttps(8) M3000/M4000/M5000/ command DESCRIPTION: M8000/M9000 Servers The size of the file to be generated by sethttps(8) grows with XSCF Reference Manual total character count typed in the operands of configuring the self-certification authority and creating a self-signed web server certificate, and creating a CSR.
Page 36
UserPricipalName (UPN) or Distinguished Name (DN). A part of the description of EXAMPLE12 will be changed as follows: XSCF> setad dnslocatorquery -i 2 '_ldap._tcp.gc._msdcs..' SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...
Page 37
Software Documentation Updates (Continued) TABLE 11 Title Page Number Update XSCF man pages The usermapmode description in the OPERANDS section will setldapssl(8) command be changed as follows: Enable or disable use of the usermap. When enabled, user attributes specified with the usermap operand, rather than userdomain, are used for user authentication.
2. Type the following command: XSCF> showstatus The following example identifies that DIMM number 0A on the Motherboard unit has degraded memory.. XSCF> showstatus MBU_A Status:Normal; MEM#0A Status:Degraded; SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010...