Fujitsu SPARC Enterprise M3000 Getting Started Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Server
  5. SPARC Enterprise M3000
  6. Getting started manual
Fujitsu SPARC Enterprise M3000 Getting Started Manual

Fujitsu SPARC Enterprise M3000 Getting Started Manual

Hide thumbs Also See for SPARC Enterprise M3000:
1
2
3
4
5
6
7
8

Quick Links

See also: Service Manual, User Manual
Accessing Important Information and Documentation
Before you deploy the SPARC Enterprise M3000 server, check for late breaking information about patches for
firmware and software, and known issues. This information, found in the SPARC Enterprise M3000/M4000/M5000/
M8000/M9000 Servers Product Notes, supersedes the information in other documents. The latest version of SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes, SPARC Enterprise M3000 Server Installation Guide,
and other documentation for the M3000 server are available on the following website:
http://www.fujitsu.com/sparcenterprise/manual/
SPARC Enterprise M3000 Server Documentation
• SPARC Enterprise M3000 Server Overview Guide
System
• SPARC Enterprise M3000 Server Site Planning Guide
Planning and
Site Preparation
• SPARC Enterprise Equipment Rack Mounting Guide
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes
System
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and Safety
Installation
Information (Printed)
• SPARC Enterprise M3000 Server Safety and Compliance Guide
• SPARC Enterprise M3000 Server Getting Started Guide (This document)
• SPARC Enterprise M3000 Server Installation Guide
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide
SPARC Enterprise M3000 Server

Getting Started Guide

1
loading

Related Manuals for Fujitsu SPARC Enterprise M3000

Summary of Contents for Fujitsu SPARC Enterprise M3000

  • Page 1: Getting Started Guide

    M8000/M9000 Servers Product Notes, supersedes the information in other documents. The latest version of SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes, SPARC Enterprise M3000 Server Installation Guide, and other documentation for the M3000 server are available on the following website: http://www.fujitsu.com/sparcenterprise/manual/ SPARC Enterprise M3000 Server Documentation • SPARC Enterprise M3000 Server Overview Guide System •...
  • Page 2 For SPARC Enterprise M3000 server, the documents of localized versions will be offered on the Globalization website: http://www.fujitsu.com/sparcenterprise/manual/ Note – AC power supply model and DC power supply model are available for the M3000 server. The chapters of each document are written based on AC power supply model. If there is any specific information on DC power supply model, it is indicated in the appendix “DC Power Supply Model“...
  • Page 3 Rear Panel of the Server FIGURE 1 AC Power Supply Model DC Power Supply Model Location Number Component Power supply unit PCIe slot Serial port (for XSCF) LAN port (for XSCF) Gigabit Ethernet (GbE) port (for OS) 7. Use the RS232C cable (serial cable, RJ-45 to DB-9) supplied with the server in the Accessory Kit, and connect the administration console to the serial port (see , #3) on the rear panel of the server.
  • Page 4 8. The following steps will log in to the XSCF Shell and initialize the XSCF settings. XSCF is a system control facility to set up and control the server. To initialize the XSCF settings, use the XSCF default user account. a.
  • Page 5 e. Confirm that the XSCF Shell prompt is displayed on the administration console. XSCF> f. Initialize the XSCF settings. The following are the required settings for installation. Settings Command Registration of an XSCF user account, password, and user privileges adduser, password, Registration of a user account of a field engineer (FE) (for maintenance) setprivileges Date and time settings...
  • Page 6 g. Press the Enter key, and then press the "#" and “.“(period) keys. This switches you from the domain console to the XSCF Shell. h. From the XSCF Shell, execute the fmdump command or showlogs command, and confirm that no errors are found.
  • Page 7 14. The following steps will boot the Oracle Solaris Operating System. The Oracle Solaris OS is preinstalled in the slot 0 of the hard disk drives. a. From the ok prompt of the domain console, execute the boot command. ok boot b.

  • Page 8: Documentation Feedback

    Copyright ® 2007, 2012, Fujitsu Limited. All rights reserved. Oracle and/or its affiliates provided technical input and review on portions of this material. Copyright ® 2007, 2012, Fujitsu Limited. Tous droits réservés. Entrée et revue tecnical fournies par Oracle et/ou ses affiliés sur des parties de ce matériel.