Event Monitoring Linkage; Gui Linkage; J.2.4 Gui Linkage; Rack Grouping Function Linkage - Fujitsu PRIMEQUEST 2000 Series Administration Manual
Primequest 2000 series
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Appendix J Systemwalker Centric Manager Linkage
J.2
-
1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 2000 Series Tool Reference (C122-E110EN)
J.2.3 Event monitoring linkage
This section provides an overview of event monitoring linkage and describes its modification procedure.
Overview of event monitoring linkage
Event monitoring linkage enables the reporting of event alarms monitored and logged by SVS to the
operations management server, in linkage with the Systemwalker agent. Only the event alarms recognized by
Systemwalker (itself) are reported. An event filtering definition is simple to include. An event filtering definition
provided for each model (Systemwalker template, see
how to include this template, see the manual of Systemwalker Centric Manager.
J.2.4 GUI linkage
This section provides an overview of GUI linkage and describes the registration procedure.
Overview of GUI linkage
To permit access to the URL of the MMB login window of the PRIMEQUEST 2000 series from Systemwalker,
register it from the [Operation] menu.
For a dual MMB configuration, configure GUI linkage for both of the MMB nodes.
GUI linkage procedure
1. Register the menu to start the PRIMEQUEST 2000 series MMB console. Open the command prompt on
the operations management client. Execute the following command (see
prepare) in any directory:
mpaplreg.exe -a -m
2. Reboot the Systemwalker console.
3. After the reboot, confirm that the new menu was added to the [Operation] menu. Display the menu by
right- clicking the specified node, and display the webpage with the specified URL.
Remarks
The above configuration must be complete for every registered PRIMEQUEST 2000 series server node.
J.2.5 Rack grouping function linkage
This section provides an overview of the rack grouping function linkage of Systemwalker and describes the
procedure.
Overview of rack grouping function linkage
Systemwalker enables automatic grouping per rack by collecting the IP address of the management LAN of
each partition node from the MMB node of the PRIMEQUEST 2000 series server. The management LAN
must be configured in advance so that its IP address can be obtained from the MMB node.
Procedure for rack grouping function linkage
Log in to the operating system of each partition with Administrator privileges to configure the management
LAN. For details on how to configure the management LAN, see PRIMEQUEST 2000 Series ServerView
Mission Critical Option User Manual
The PRIMEQUEST 2000 series rack grouping function automatically registers PRIMEQUEST nodes. For
details on operation of this function, see the Systemwalker Centric Manager PRIMERGY/PRIMEQUEST
Administration Guide.
J.2.6 Linkage with ServerView
In the PRIMEQUEST 2000 series server, ServerView Agent (SV Agent) is installed on each partition, and
SVOM (ServerView Operation Manager) can handle configuration management and problem monitoring.
Configuring Systemwalker Centric Manager Linkage
TABLE J.1 Files and tools to
283
prepare). For details on
TABLE J.1 Files and tools to
C122-E175-02EN
Table of Contents
Troubleshooting
