NEC Univerge SV8300 Manual page 29

•

Flexible Numbering Plan

•

Direct-In Termination - CCIS

•

Station-to-Station Calling - CCIS

•

Flexible Numbering of Stations - CCIS

•

Toll Restriction -3/6 Digits - CCIS

5. The ISDN Terminal can provide voice and data communication via the CCIS network. The CCIS network

must be digital.

6. During communication via the CCIS network, the link reconnection is not available.

7. Station service conditions are as follows:

• Station Hunting

When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy Single Line Tele-

phone/Multiline Terminal, another Single Line Telephone/Multiline Terminal in Station Hunting group

is called. Note

When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy ISDN Terminal, an-

other ISDN Terminal in Station Hunting group is called. Note

Note: An ISDN Terminal cannot be included in the same Station Hunting group as Single Line Telephone/Multi-

line Terminals.

• Call Forwarding

An ISDN Terminal cannot set Call Forwarding - All Calls/Busy Line/Don't Answer, and cannot be the

destination of Call Forwarding.

When an ISDN Terminal is a calling station, it can be forwarded to another Single Line Telephone/Mul-

tiline Terminal but cannot be forwarded to central office trunk or tie line trunk.

• Call Transfer

A Single Line Telephone/Multiline Terminal cannot transfer a call in progress with an ISDN Terminal to

another station.

In the same way, an ISDN Terminal cannot transfer a call in progress with a Single Line Telephone/Mul-

tiline Terminal to another station.

While a Single Line Telephone/Multiline Terminal converses with CCIS trunk and ISDN trunk, the Sin-

gle Line Telephone/Multiline Terminal cannot transfer the call to an ISDN Terminal.

• Call Pickup, Call Pickup - Designated group

An ISDN Terminal cannot be assigned to Call Pickup group and cannot pickup a call to another station.

A Single Line Telephone/Multiline Terminal cannot pickup a call to an ISDN Terminal.

• Executive Override

During voice communication between a Single Line Telephone/Multiline Terminal and an ISDN Termi-

nal, another Single Line Telephone/Multiline Terminal can interrupt into only a Single Line Telephone/

Multiline Terminal. During data communication with an ISDN Terminal, Executive Override is not al-

lowed.

• Busy Service (Step Call, Call Back)

When a Single Line Telephone/Multiline Terminal calls a busy ISDN Terminal, busy service such as Step

Call and Call Back cannot be provided to the ISDN Terminal.

It is the same when an ISDN Terminal calls a busy Single Line Telephone/Multiline Terminal.

8. When a Single Line Telephone is calling an ISDN Terminal, or a Single Line Telephone and an ISDN Ter-

minal is in conversation, hooking service is not available. Therefore, at this time other services are not avail-

able.

UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)

NWA-033632-001, Issue 1

ISDN Terminal

Page 21