NEC Express5800 320Fd-MR User Manual page 226
Hide thumbs
Also See for Express5800 320Fd-MR:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
8-8 System Upgrade
3.
Hold the stopper, and disconnect the power cable of the module to be removed.
The stopper will return to the vertical position when you release it.
CHECK:
Leave your hands and make sure that the stopper returned to the vertical position. If you
disconnect the cable and the stopper does not go back to this position, you cannot pull out the
CPU/IO module in the next step.
4.
Loosen the two black screws securing the CPU/IO module on the left and the right front side, and
then press down the handle.
IMPORTANT:
Before you pull out a CPU/IO module, check the rear of the server to make sure that cables
for connecting to peripheral equipment or network are disconnected. If any cables are
connected, keep a record of where the cables are connected and disconnect them from the
module to pull out.
TIPS:
If you cannot disconnect the LAN cable easily, disconnect while pressing the latch with a
slotted screwdriver.
Stopper
Table of Contents
Troubleshooting
