NEC Express5800 320Fd-MR User Manual page 150
Hide thumbs
Also See for Express5800 320Fd-MR:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
5-20 Installing and Using Utilities
When the Displayed BIOS Information is Incorrect
BIOS information which is displayed by clicking [ft] - [CPU Module] - a CPU
module - [General] - [BIOS Information] on a Data Viewer on ftServer Utility may not be displayed
correctly. In such a case, display the BIOS information on the Data Viewer by clicking [ESMPRO]
- [BIOS] or SETUP of system BIOS ([Server] – [System Management] – [BIOS Version]).
Ethernet Adapters You Do Not Use
When the Ethernet adapter is unused (i.e. cables are not connected to its port), NEC ESMPRO
Agent determines that the port is faulty (does not have any media), and the status color of [ft] – [PCI
module] – [Ethernet Board] of the Data Viewer turns red (abnormal). The server status color of
Operation Window also turns red (abnormal).
As for the ports of the unused Ethernet adapeter, connect the unused port of PCI module 0 and that
of PCI module 1 with a cross cable.
DataViewer Display When Only One of the PCI Modules (IO Modules) Is Operating
When only one of the PCI modules (IO modules) is operating (non-dual configuration), the SCSI
enclosure or mirror disk status cannot be displayed normally.
To check if the dual configuration is changed to the simplex operation mode, check the event log,
AlertViewer log, or the status color of PCI module of DataViewer.
Display of Ethernet Board of ftServer Utility
FtServer Utility displays the information of Network Controller.
This server has four in-built Network Ports. Two trees of the Ethernet Board are displayed since a
module has two Network Controllers.
Table of Contents
Troubleshooting
