How Do I Insert And Remove Sd Cards From Expansion Slot - HP iPAQ rx3000 series Frequently Asked Questions Manual

Ipaq rx3000 series mobile media companion

Hide thumbs Also See for iPAQ rx3000 series:

Table of Contents

How Do I Insert and Remove SD Cards

from Expansion Slot?

To install a Secure Digital (SD) card into the expansion slot on

the HP iPAQ:

1. Locate the slot on the top of the HP iPAQ.

2. Remove the protective plastic card.

3. Insert the expansion card into the expansion slot and push the

connection edge of the card firmly into the expansion slot.

Note:

manufacturer's instructions to install it.

To remove a Secure Digital (SD) expansion card from the

expansion slot on the HP iPAQ:

1. Close all applications that are using the expansion card.

2. Remove a card from the Secure Digital expansion slot by

slightly pushing down on the card 1 to unlock it.

3. When the card disengages and pops up 2, pull it from the

expansion slot.

If your expansion card is not recognized, follow the card