Sony SVR-3000 Installation Manual page 21

Digital network recorder

Hide thumbs Also See for SVR-3000:

Table of Contents

01_COV.book Page 21 Wednesday, July 10, 2002 3:33 PM

Use this example if you have an antenna or cable without a cable box, or you do not

have a VCR.

Find your program source cable.

The program source cable is the cable that your cable company installed, or the

one that's connected to your antenna. This cable is probably already hooked up to

your VCR or TV; if so, disconnect it.

Connect your program source cable to the RF In jack on the

back of the SVR Recorder.

Connect the SVR Recorder to your TV.

If your TV has a composite video input, connect an Audio/Video cable from the

SVR Recorder Output to your TV's Input. If not, connect the RF coaxial cable

(supplied) from the RF Out jack on the back of the SVR Recorder to RF In on the

back of your TV.

Continue.

Now continue with step 4 on page 34.

Connection Examples