Table of Contents
Output commands
Use the CLI commands in to control the output and display help information for the CLI commands.
Table 5 CLI output commands
Command
trace
verbose
version
help
VLS commands
This section describes the VLS commands in the VLS CLI command set.
Network settings configuration commands
Use the CLI commands in to configure the VLS network settings via a serial session. See
a serial
session.
Changing the network configuration parameters modifies four system files:
/etc/hosts
/etc/sysconfig/network
/etc/resolv.conf
/etc/sysconfig/network-scrips/ifcfg-eth1
108
CLI command set
Description
Displays the stack trace after an exception has occurred.
Toggles verbose output on and off. When on, all messages
are output to the screen.
Indicates current CLI version. If verbose is on, the module
revisions display also.
Displays CLI command usage information. Where <-tag>
can be:
-c - Provides help information for the specified
CLI command
-all - Lists all CLI commands and their help information
Opening
Table of Contents
