The Lc Command Screen - HP rp7440 Service Manual
User service guide, fourth edition - hp integrity rx7640 and hp 9000 rp7440 servers
Hide thumbs
Also See for rp7440:
- Installation manual (73 pages) ,
- Administrator's manual (266 pages) ,
- Manual (114 pages)
Table of Contents
Figure 3-31 The lc Command Screen
MP:CM>
This command modifies the LAN parameters.
Current configuration of MP customer LAN interface
MAC address
IP address
Hostname
Subnet mask
Gateway
Status
Link
Do you want to modify the configuration for the MP LAN (Y/[N]) q
NOTE:
address from the customer.
3.
At the prompt, Do you want to modify the configuration for the MP LAN?,
enter Y.
The current IP address is shown; and the following prompt displays: Do you want to
modify it? (Y/[N])
4.
Enter Y.
5.
Enter the new IP address.
The customer must provide this address for network interface 0.
6.
Confirm the new address.
7.
Enter the MP Hostname.
This is the host name for the customer LAN. The name can be as many as 64 characters in
length, and include alphanumeric characters, - (dash), _ (under bar),. (period), or a space.
HP recommends that the name be a derivative of the complex name. For example,
Acme.com_MP.
8.
Enter the LAN parameters for the Subnet mask and Gateway address fields.
This information must come from the customer.
When this step is completed, the system will indicate that the parameters have been updated
and return to the MP Command Menu prompt (MP:CM>)
9.
To check the LAN parameters and status, enter the ls command at the MP Command Menu
prompt (MP:CM>).
78
Installing the Server
lc
: 00:12:79:b4:03:1c
: 15.11.134.222
: metro-s
: 255.255.248.0
: 15.11.128.1
: UP and RUNNING
: Connected 100Mb Half Duplex
The value in the IP address field has been set at the factory. Obtain the LAN IP
0x0f0b86de
0xfffff800
0x0f0b8001
- Quick Links:
- Cell Board
- Replaceable Parts
Hide quick links:
Table of Contents
Troubleshooting
