Removing And Replacing A Slimline Dvd Drive; Power Cable Connection And Routing; Dvd Drive Location - HP rp7440 Service Manual
User service guide, fourth edition - hp integrity rx7640 and hp 9000 rp7440 servers
Hide thumbs
Also See for rp7440:
- Installation manual (73 pages) ,
- Administrator's manual (266 pages) ,
- Manual (114 pages)
Table of Contents
Figure 6-22 Power Cable Connection and Routing
5.
Connect the SCSI cable to the rear of the drive.
6.
Install the left and right media rails and clips to the drive.
7.
Fold the cables out of the way and slide the drive into the chassis. The drive easily slides
into the chassis; however, a slow firm pressure is needed for proper seating. The front locking
tab will latch to secure the drive in the chassis.
Removing and Replacing a Slimline DVD Drive
The Slimline DVD drive is located in the front of the chassis. This CRU is hot-pluggable.
CAUTION:
follow ESD safety precautions could result in damage to the server.
Figure 6-23 DVD Drive Location
DVD
Observe all ESD safety precautions before attempting this procedure. Failure to
Removable Media Power Cable
Routed Through the Cable Clip
on the Back of the DVD Drive.
Removing and Replacing a Slimline DVD Drive
161
- Quick Links:
- Cell Board
- Replaceable Parts
Hide quick links:
Table of Contents
Troubleshooting
