Swing Operation; Manual Auto Operation - Fujitsu ASTG24LVCA Operating Manual

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 5

The SWING Display (Fig. 6

In this mode, the Airflow Direction Louvers will swing automatically to direct the air

flow both up and down.

To stop SWING Operation

Press the SWING button (Fig. 5

The SWING Display (Fig. 6

Airflow direction will return to the setting before swing was begun.

About Swing Operation

During cooling/Dry mode : Swings between

During heating mode

: Swings between

● The SWING operation may stop temporarily when the air conditioner's fan is not

operating, or when operating at very low speeds.

Use the MANUAL AUTO operation in the event the Remote Controller is lost or otherwise unavailable.

How To Use the Main Unit Controls

Press the MANUAL AUTO button (Fig. 2

on the main unit control panel.

To stop operation, press the MANUAL AUTO button (Fig. 2

).

) will light.

) once again.

) will go out.

and

.

and

.

) for three seconds

) for three seconds.

● When the air conditioner is operated

by the controls on the Main Unit, it will

operate under the same mode as the

AUTO mode selected on the Remote

Controller

(see page 7).

● The fan speed selected will be "AUTO"

and the thermostat setting will be

°C

standard (24

).

En-12