Upper Paper Guide - Epson R260 - Stylus Photo Color Inkjet Printer Service Manual
Color inkjet printer
Hide thumbs
Also See for R260 - Stylus Photo Color Inkjet Printer:
- Printer basics manual (82 pages) ,
- Supplementary manual (14 pages) ,
- Start here manual (8 pages)
Table of Contents
EPSON Stylus Photo R260/R265/R270, R360/R380/R390
4.5.13 Upper Paper Guide
Be sure to follow the procedure below to remove the Upper
Paper Guide to avoid damaging the PE Sensor Lever.
It is recommended to place a transparent sheet between the
Upper and Front Paper Guides to avoid scratching the roller.
Do not touch the roller surface with bare hands as it can
adversely affect the print quality.
Parts/Components need to be removed in advance
All exterior parts/ All control boards / Middle Housing / Printer Mechanism / CR Scale
/ APG Unit / Printhead / Ink System / ASF Unit
Removal procedure
Refer to the Orientation Definition below for the directions
indicated in the following procedures.
•
"4.1.6 Orientation Definition (p.61)"
1.
Remove the three springs from the rear side, disengage the five hooks and
remove the Upper Paper Guide from the Main Frame.
Figure 4-154. Removing the Upper Paper Guide (1)
Disassembly/Assembly
Spring
[Rear side]
Disassembly of the Printer Mechanism
2.
Remove the Upper paper Guide pressing
Sensor Lever.
Upper Paper Guide
Removal Direction
Figure 4-155. Removing the Upper Paper Guide (2)
The figure below is the Upper Paper Guide. The two thin shafts
indicated with the arrows are likely to break, however, the Upper
Paper Guide does not need to be replaced even if the shafts become
broken. Because the shafts do not go on the bushings of the Printer
Frame.
When installing the Spring, check the tip position of the spring and
secure it firmly. (Fig.4-154)
Revision B
part to lower the tip of the PE
Tip
Press
PE Sensor Lever
Do not touch with bare hands.
108
- Quick Links:
- Service Manual
- Printing
Hide quick links:
Table of Contents
Troubleshooting
