Show Management Access-Class - Dell PowerConnect 6224 Command Line Interface Manual
6200 series systems
Hide thumbs
Also See for PowerConnect 6224:
- User manual (786 pages) ,
- Release note (34 pages) ,
- Planning and preparation manual (12 pages)
Table of Contents
The following example shows how to configure all the interfaces to be
management interfaces except for two interfaces, Ethernet 1/g1 and Ethernet
2/g9.
console(config)# management access-list mlist
console(config-macal)# deny ethernet 1/g1 priority
<1-64>
console(config-macal)# deny ethernet 2/g9 priority
<1-64>
console(config-macal)# permit priority <1-64>
console(config-macal)# exit
console(config)# management access-class mlist
show management access-class
Use the show management access-class command in Privileged EXEC mode
to display information about the active management access list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the management access-list information.
console# show management access-class
1155
Management ACL Commands
- Quick Links:
- Cli Reference Guide
- Using the Cli
Hide quick links:
Table of Contents
