Dell PowerVault NX3500 Administrator's Manual page 38
Powervault nx3500 system
Hide thumbs
Also See for PowerVault NX3500:
- Administrator's manual (218 pages) ,
- Getting started with (209 pages) ,
- Hardware owner's manual (118 pages)
Table of Contents
Select Disk Group and then Create.
b
Alternatively, you can right-click Unconfigured Capacity, and select
Create Disk Group from the pop-up menu.
–
To create a disk group from unassigned physical disks in the storage
array:
On the Physical tab, select one or more unassigned physical disks of
a
the same physical disk type.
Select Disk Group and then click Create.
b
Alternatively, you can right-click the unassigned physical disks, and
select Create Disk Group from the pop-up menu.
–
To create a secure disk group:
On the Physical tab, select one or more unassigned security capable
a
physical disks of the same physical disk type.
Select Disk Group and then click Create.
b
Alternatively, you can right-click the unassigned security capable
physical disks, and select Create Disk Group from the pop-up menu.
The Introduction (Create Disk Group) window is displayed.
4 Click Next.
The Disk Group Name and Physical Disk Selection window is displayed.
5 Type a name for the disk group in Disk group name.
NOTE:
6 Select the appropriate Physical Disk selection choices, you can select:
•
Automatic, see step 7
•
Manual, see step 10
7 Click Next.
For automatic configuration, the RAID Level and Capacity window is
displayed.
8 Select the appropriate RAID level in Select RAID level. You can select
RAID levels 1/10, 6, and 5. Depending on the RAID level selection, the
physical disks available for the selected RAID level are displayed in Select
Capacity table.
38
Setting Up Your PowerVault NX3500 Solution
The disk group name should not exceed 30 characters.
- Quick Links:
- Nas Manager Configuration Wizard
Hide quick links:
Table of Contents
Troubleshooting
