Interfaceshow; Table 4-19. Fspfshow Command Field Descriptions; Table 4-20. Interfaceshow Command Static Field Descriptions - Dell PowerVault 50F Installation And Troubleshooting Manual
Dell powervault 51f 8-port fibre channel switch installation and troubleshooting guide
Hide thumbs
Also See for PowerVault 50F:
- Installation and troubleshooting manual (172 pages) ,
- User manual (42 pages) ,
- Rack installation manual (28 pages)
Table of Contents
support.dell.com
Table 4-19. fspfShow Command Field Descriptions
Field
Description
version
The version of the FSPF protocol.
domainID
The local switch's domain ID.
isl_ports
A bitmap field that shows all local switch E_Ports.
startTime
The time the FSPF started, in milliseconds from boot.
other
The other fields represent internal FSPF variables.
interfaceShow
The interfaceShow command displays FSPF interface information. This includes
static information about the port (for example, variables allocated even when a port is
down), and "neighbor" information which includes variables associated with the
remote switch connected to the port. A FSPF interface corresponds to an E_Port. The
static information fields are described in Table 4-20. Neighbor information fields are
described in Table 4-21.
With no parameters, it shows the information for all switch interfaces. The command
syntax is
interfaceShow
Table 4-20. interfaceShow Command Static Field
Descriptions
Field
Description
idbP
The current neighbor state. Its value must be NB_ST_FULL
for the ISL to forward frames to the adjacent switch. Other
values may be transitory, however if a value is retained for
more than ten seconds, contact Dell for technical assistance.
nghbP
Neighbor capabilities has a value of 0.
ifNo
The port number. It should be identical to the value specified
in the command line.
cost
The cost of sending a frame over the ISL connected to this
port. The value 1000 indicates a 1-gigabits per second (Gbps)
link.
delay
The conventional delay incurred by a frame transmitted on
this ISL. It is required by the FSPF protocol, and is a fixed
value.
lastScn
Last State Change Notification (SCN) received on this
interface.
lastScnTime
Time the last SCN was received.
upCount
The number of times this interface initialized (the transition
number from an offline to E_Port state).
.
PowerVault 51F Commands 4-35
Table of Contents
