Portlogclear; Portlogdump; Portstatsshow; Table 4-14. Portstatsshow Command Field Descriptions - Dell PowerVault 50F Installation And Troubleshooting Manual
Dell powervault 51f 8-port fibre channel switch installation and troubleshooting guide
Hide thumbs
Also See for PowerVault 50F:
- Installation and troubleshooting manual (172 pages) ,
- User manual (42 pages) ,
- Rack installation manual (28 pages)
Table of Contents
support.dell.com
Table 4-13. portErrShow Command Field Descriptions (continued)
Field
enc in
crc err
too shrt
too long
bad eof
enc out
disc c3
link fail
loss sync
loss sig
frjt
fbsy
portLogClear
The portLogClear command clears the data from the port log. The command syntax
is
portLogClear.
portLogDump
The portLogDump command prints the port log without page breaks. The command
syntax is
portLogDump.
portStatsShow
The portStatsShow command, when used with a port number, gives a static view of
the port status when the switch executed the command. For example, to update the
command and check if an error count is increasing, reissue the portStatsShow com-
mand to capture another snapshot. Fields for the portStatsShow command are
described in Table 4-14.
The command syntax is portStatsShow .
Table 4-14. portStatsShow Command Field Descriptions
Field
Description
stat_wtx
Number of 4-byte words transmitted from the port.
stat_wrx
Number of 4-byte words received by the port.
Description
Encoding errors inside of frames
Frames with CRC errors
Frames shorter than minimum
Frames longer than maximum
Frames with bad end-of-frame delimiters
Encoding error outside of frames
Class 3 frames discarded
Link failures (LF1 or LF2 states)
Loss of synchronization
Loss of signal
Frames rejected with F_RJT
Frames busied with F_BSY
PowerVault 51F Commands 4-25
Table of Contents
