HP 300X - JetDirect Print Server Administrator's Manual page 77
Hp jetdirect print server administrator's guide (300x, 510x)
Hide thumbs
Also See for 300X - JetDirect Print Server:
- Installation and configuration manual (80 pages) ,
- Manuallines (33 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Table 7.2
General HP Jetdirect Messages (9 of 10)
Message
UNABLE TO ATTACH TO
QUEUE
UNABLE TO CONNECT
TO SERVER
UNABLE TO FIND
SERVER
UNABLE TO GET NDS
SRVR ADDR
ENWW
Description
A failure was detected when the HP Jetdirect print server
tried to attach to one of the queues assigned to the print
server object. This may be because no servers are allowed
to attach to this queue. There may also be a networking
or security problem. Use PCONSOLE to make sure that
servers are allowed to attach to the queue, to delete the
print server object from the list of queue servers if you want
the HP Jetdirect print server to service other queues, or
to delete the queue and create a new one (the print server
object must be added to the list of queue servers).
When the HP Jetdirect print server is configured for
multiple file servers, the error is only displayed on the
configuration page if none of the file servers made the
connection.
Remote Printer mode: The HP Jetdirect print server was
unable to establish an SPX connection with the print
server. Make sure that the print server is running and that
all cables and routers are functioning correctly.
Queue Server mode: The HP Jetdirect print server could
not establish an NCP connection to the file server. Make
sure that the correct file servers are connected.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file
servers were successfully connected.
The HP Jetdirect print server was unable to find the
NetWare print server (Remote Printer mode) or file server
(Queue Server mode). (There was no response to service
queries for advertising print servers or file servers that
matched the configured print server or file server name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP Jetdirect print server matches the actual name used
by the print server or file server. Also make sure that all
cables and routers are functioning correctly.
The NDS server address cannot be located or accessed.
HP Jetdirect Configuration Page Messages 77
Hide quick links:
Table of Contents
Troubleshooting
