Moving To Another Network - HP 300X - JetDirect Print Server Administrator's Manual

Hp jetdirect print server administrator's guide (300x, 510x)

Hide thumbs Also See for 300X - JetDirect Print Server:

Table of Contents

Moving to Another Network

When moving an HP Jetdirect print server that is configured with

an IP address to a new network, make sure that the IP address does

not conflict with addresses on the new network. You may change

the IP address of the print server to one that can be used on the new

network, or erase the current IP address and configure another

address after you are installed on the new network. Cold reset the

print server (see Chapter 6, "Troubleshooting the HP Jetdirect

Print Server," for instructions).

If the current BOOTP server is not reachable, you may need to

locate a different BOOTP server and configure the printer to this

server.

If the print server was configured using BOOTP, DHCP or RARP,

edit the appropriate system files with updated settings. If the IP

address was manually set (for example, Telnet), reconfigure IP

parameters as described in this chapter.

40 TCP/IP Configuration

ENWW

Table of Contents