HP 300X - JetDirect Print Server Administrator's Manual page 18
Hp jetdirect print server administrator's guide (300x, 510x)
Hide thumbs
Also See for 300X - JetDirect Print Server:
- Installation and configuration manual (80 pages) ,
- Manuallines (33 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Note
●
By a network-based server using RARP (Reverse Address
Resolution Protocol) answering the print server's RARP request
and supplying the print server with the IP address. The RARP
method only allows you to configure the IP address.
●
By using the arp and ping commands from your system.
●
By setting configuration parameters using Telnet. In order to set
configuration parameters, set up a Telnet connection from your
system to the HP Jetdirect print server using the default
IP address. The default IP address takes effect two minutes after
the printer is turned on (if none of the other configuration
methods have been used). (Older products may take longer for
the IP address to take effect.) The default IP address is
192.0.0.192. If Telnet is used, the print server saves the
configuration even if the printer or print server is turned off.
●
By browsing to the embedded Web server on the HP Jetdirect
print server and setting the configuration parameters.
18 TCP/IP Configuration
Linux and UNIX systems: For more information,
see the bootpd man page.
On HP-UX systems, a sample DHCP configuration
file (dhcptab) may be loaded in the /etc directory.
If your HP-UX system does not provide Dynamic
Domain Name Services (DDNS) for its DHCP
implementations, HP recommends that you set all
print server lease durations to infinite. This ensures
that print server IP addresses remain static until
such time as Dynamic Domain Name Services are
available.
ENWW
Hide quick links:
Table of Contents
Troubleshooting
