2.2 Recycle Conveyor Performance Check
(1)
Procedure
Reference
(2)
Fig. 4-1 "COMPONENT RECOGNITION TEST" Window
Reference
(3) Pick-up the component in the "Manual" or "Auto" mode.
(4) Press the [Comp Dscd] button and then press the [START] button on
the operation panel.
The component discharge operation will be performed based on the set-
ting in the "Component Library Data".
• The lead time for the component discharge is the same as that for the
(5) The recycle conveyor is automatically moved, pitch by pitch, so that the
discharged component is not piled on the previously discharged compo-
nent.
(6) Press the [MANUAL] switch to check the driving of the recycle con-
veyor, if required.
0701-001
2.2 Recycle Conveyor Performance Check
Set the component library data.
Refer to "2.1 Component Library Data" for component library
setting.
Display the "COMPONENT RECOGNITION TEST" window.
Refer to "5.1 Component Recognition Test" in "Chapter 4 Menus for
Maintenance"(the instruction manual (Vol.2) of the main machine)
for the detailed information on the "COMPONENT RECOGNITION
TEST" window.
component placement in the automatic operation.
19
Tg1481-ID-SO