Table of Contents
Removing the top tron-lighting cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
stability
foot.
2. Remove the left and right side-panels. See
3. Remove the
handle
bars.
4. Remove the
front
bezel.
5. Remove the
rear
bezel.
6. Remove the
base
panel.
Procedure
1. Disconnect the top tron-lighting cables from the logo board.
2. Remove the top tron-lighting cables from the routing-guides on the chassis.
1. chassis
3. logo board
3. Peel the tape that secures the top tron-lighting cables to the chassis and lift the top tron-lighting cables.
computer. After working inside your computer, follow the instructions in
"Removing the side
panels".
2. tron-lighting cables
4. routing guides
After working inside your
111
Table of Contents
