Alarm; Door Alarm; Temperature Alarm - Bosch KGN56 Series Information For Use
Hide thumbs
Also See for KGN56 Series:
- User manual (140 pages) ,
- Information for use (84 pages) ,
- Information for use (144 pages)
Table of Contents
Available languages
Available languages
en Alarm
Alarm
9 Alarm
Alarm
9.1 Door alarm
If the appliance door is open for a
while, the door alarm switches on.
A warning tone sounds,
the light bar flashes and the temper-
ature display for the affected com-
partment flashes.
Switching off the door alarm
Close the appliance door or press
▶
.
a The warning tone is switched off.
9.2 Temperature alarm
If the freezer compartment becomes
too warm, the temperature alarm is
switched on.
A warning tone sounds and the set
temperature (freezer compartment),
and the light bar flash.
CAUTION
Risk of harm to health!
During the thawing process, bacteria
may multiply and spoil the frozen
food.
Do not refreeze food after it has
▶
been defrosted or started to de-
frost.
Refreeze food only after cooking.
▶
These items should no longer be
▶
stored for the maximum storage
period.
The temperature alarm can be
switched on in the following cases:
¡ The appliance is switched on.
Do not store any food until the ap-
pliance has reached the set tem-
perature.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
54
¡ Large quantities of fresh food are
being placed inside.
Switch on Super freezing before
placing large quantities of food in
the appliance.
¡ The freezer compartment door is
open for too long.
Check whether the frozen food has
flashes,
defrosted or thawed.
Switching off the temperature
alarm
Press
▶
a The warning tone is switched off.
Home Connect
10 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
.
1
)
Chapters
Table of Contents
