Table of Contents
Configure the CardioSoft System for
Network Communication
CardioSoft V7 Installation
For CardioSoft installation instructions, refer to the Cardiosoft Software Installation
and Upgrade Guide.
Set Up DCP Port in CardioSoft V7.0
Set up a CardioSoft v7.0 server for DCP communication.
Configure the port in connectivity server tab of server computer and then configure
the same port in the client computer to establish DCP connection from the client
computer.
Steps as follow to establish DCP connection:
1.
Open server computer.
2.
Click Connectivity Server tab.
3.
Enter the DCP server details such as Friendly Name, IP Address, Copy Location,
and Port number (for example, 9240 or 9280).
4.
Click OK.
5.
Open client computer.
6.
Click DCP tab.
7.
Enter Server Address with same port as in server computer (for example: http://
X.X.X.X:9240/SendTest).
8.
Click Test Connection.
9.
Click OK.
5864335-001-1
Configure the CardioSoft System for Network Communication
MAC
™
5 A4/MAC
™
5 A5/MAC
E
™
5 Lite
331
Table of Contents
