Table of Contents
Work with the Files List
If
Patient information is incomplete in one
or more patient reports selected for
transmission (for example, required fields
are blank or contain invalid data), a message
displays in the notification area indicating
that one or patient reports cannot be
transmitted because of incomplete patient
data.
Print a Stored Patient Report
You can print a copy of a stored ECG patient report in any configured report format
for the selected lead set.
If you purchase the NETP - Network Printer option and enable it in the Option
Manager,
• you can print the copy via thermal printer or send the copy to network printer on
MAC 5 devices with thermal printer.
• you can only send the copy to network printer on MAC 5 Lite.
For more information of network printer, see
1.
From the Acquisition screen, select the Files list.
The Files collapsed list opens. You can also select the Expand icon to open the
Files expanded list:
If
You are in the
Files collapsed
list
You are in the
Files expanded
list
2.
Select the Rhythm or Full Disclosure or ECG patient report for which you want to
print a copy.
The selected patient report opens in a new screen.
3.
Before printing a copy of the report, review the patient report and verify:
• The patient information in the patient report is correct.
• The ECG, Full Disclosure, or Rhythm test is acquired with the desired gain and
114
Then
Select the patient report for which you want to print a copy.
The patient report opens in a new screen next to the File list.
Select the check box next to the patient report for which you want to print
a copy.
filter.
MAC
™
5 A4/MAC
™
Then
Perform the steps below:
1.
Edit the incomplete patient report to
enter missing patient data.
2.
Retry transmission.
Configure Network Printer on page
5 A5/MAC
™
5 Lite
183.
5864335-001-1
Table of Contents
