Table of Contents
Quick Links
Table of Contents
Related Manuals for AEG AC3050V
Summary of Contents for AEG AC3050V
- Page 1 AC3050V Original instructions...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
- Page 3 Fig. 1 1 - On/off switch 2 - Front handle 3 - Tank pressure gauge 4 - Regulator pressure gauge 5 - Quick connect coupler 6 - Pressure regulator knob 7 - Pressure relief valve 8 - Rubber foot x2 9 - Wheel x2 10 - Drain valve 11 - Rear handle...
- Page 4 Fig. 6 Fig. 8 1 - Quick connect coupler 2 - Quick connect air fitting 3 - To close (counterclockwise) 4 - Pressure relief valve 5 - Pressure regulator locking ring Fig. 9 1 - Oil cap 2 - Sight glass 3 - Oil level indicator 1 - Quick connect air fitting 2 - Quick coupler...
- Page 5 Fig. 11 Fig. 12 1 - Drain valve 1 - Ring 2 - To close 2 - Pressure relief valve 3 - To open Fig. 13 Fig. 14 1 - Reset button 1 - Oil drain plug Fig. 15 1 - Air filter housing 2 - Air filter 3 - Air filter cover...
-
Page 6: General Safety Warnings
AC3050V TECHNICAL DATA AIR COMPRESSOR Rated motor power 2100 W Rated current 9.5 A Air outlets 2 pcs, 6.35mm (1/4”) NITTO style connector/ coupler (suitable for NITTO fitments) Quick connector fitting size 6.35 mm (1/4”) BSP thread Weight 43.2 kg... -
Page 7: Air Compressor Safety Warnings
■ Never leave a tool unattended with the air hose attached. before turning it on. ■ Never point any air tool toward yourself or others. AIR COMPRESSOR USE AND CARE ■ Do not operate this air compressor if it does not contain a legible ■... -
Page 8: Specified Conditions Of Use
■ Use the product only for its intended use. Do not alter or modify WARNING the product from the original design or function. Do not connect to power supply until assembly is complete. Failure ■ Always be aware that misuse and improper handling of the product can cause injury to yourself and others. -
Page 9: Operation
INSTALLING AIR fILTERS you avoid damaging the wheel or the air compressor by rolling it over items in its path. See figure 5. Ensure the air compressor is unplugged the power cord is secured Attach one air filter to the cylinder cover on each side. Screw in a from free movement. -
Page 10: Draining The Tank
The pressure relief valve will automatically release air if the air tank WARNING pressure exceeds the preset maximum. The valve should be checked before each day of use by pulling the ring by hand. Never exceed the air tool’s pressure rating as recommended by 1. -
Page 11: Replacing Oil
Disconnect the power supply before making adjustments or when doing any maintenance on the machine. Use only AEG accessories and spare parts. Should components need As a routine part of air compressor maintenance, it is also advised that to be replaced which have not been described, please contact one of the oil is routinely checked for proper levels. - Page 12 Techtronic Industries Australia Pty Ltd PO Box 1065 Mount Waverley VIC 3149 Tel. no. 1300 234 797 Australia Techtronic Industries N.Z. Limited PO Box 12-806 Penrose AUCKLAND 1642 Tel no. 0800 234 797 New Zealand SyMBOLS Safety alert Please read the instructions carefully before starting the machine.
-
Page 13: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Compressor will not run Loss of power or overheating Check for proper use of extension cord No electrical power Check to be sure unit is plugged in Check fuse/breaker Blown shop/house fuse Replace shop/house blown fuse Shop/house breaker open Reset shop/house breaker, determining why problem happened... -
Page 14: Parts List
PARTS LIST 46 47 46 47 47 46 47 46... - Page 15 Description Description Description Description Crankcase Gasket Rotator Bolt Right exhaust pipe Flat key Bolt Crank shaft Elbow Bearing Unloading pipe Washer Bolt Oil sealing Elbow Bolt Bolt Bolt Check valve Gasket Spring Bolt Exhaust pipe Crankcase cover Support Washer Electrical wire Bolt Capacitance box Spring...
- Page 16 www.aegpowertools.com.au www.aegpowertools.co.nz Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 20180914v1...