Light Kit Installation - Honeywell BIRNHAM Manual

22. (Optional) To install the fan without a light kit:

Remove the screws and washers from the upper

switch housing. Align holes in optional cap with

holes in upper switch housing. Re-insert screws

and washers that were previously removed. Use

a Phillips screwdriver (not included) to secure all

screws (Fig. 22).

Proceed to step 27.

Washer

Screw

23. Remove three screws and washers from upper

switch housing. Connect the white wire from the

upper switch housing to the white wire from the

light kit. Connect the blue wire from the upper

switch housing to the black wire from the light kit.

Make sure plugs connect tightly (Fig. 23).

Washer

Screw

24. Align holes in the light kit fitter with holes in upper

switch housing. Re-insert screws and washers that

were previously removed. Use a Phillips screwdriver

(not included) to secure all screws (Fig. 24).

Washer

Screw

14

Fig. 22

Optional

Cap

Fig. 23

Light Kit

Fig. 24

Screw

and

Washer

Screw

and

Washer

Screw

and

Washer