Table of Contents
1. First remove the knob, refer to paragraph E.5 Accessing
the appliance's internal components.
Then remove the user interface panel and the front panel
by undoing the screws at the bottom.
2. Unscrew the bolts and remove the covers.
3. Push the units together. Bring the appliances to the same
height, then level them.
Replace the covers with the double cover required when
placing the order, by screwing the bolts.
20
4. Reassemble the user interface panel and the front panel
by fixing them with screws.
F.10
Sealing
For hygiene reasons, to prevent water and other substances
from running under the appliance, seal all around the joints
between the appliance and the wall or floor with permanently
elastic silicone.
Table of Contents
Troubleshooting
