Table of Contents
G.8.2
Side cover without overhang
The side cover should only be used as a closing off against the wall, against a niche and in between appliances (provided that these
have the same dimensions). Standard cover has pre-cuts that you can adapt to the appliances according to the left/right side.
Fit the 4 cage nuts A into the dedicated slots on the
1
frame.
A
Insert the hooks on the bottom of end rail F into the
3
eyelets of the connecting rail.
Attach the side of side cover E using the 4 flathead
screws supplied.
G.8.3
Sealing
For hygiene reasons, to prevent water and other substances
from running under the appliance, seal all around the joints
24
F
E
between the appliance and the wall or floor with permanently
elastic silicone.
Attach connecting rails C and D with the supplied
2
screws B.
Make sure marking on part C on the rail is pointing
forwards.
Bring the side panel E into position.
B
C
D
Slide end rail F in the direction of the arrow to align
4
it to the front.
E
F
Table of Contents
