Electrolux SkyLine ChillS 202 User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Commercial Food Equipment
  5. SkyLine ChillS 202
  6. User manual

Electrolux SkyLine ChillS 202 User Manual

Lengthwise blast chillers/freezers
Hide thumbs
Table of Contents

Quick Links

Blast Chillers/Freezers
Lengthwise
EN-US
User Manual
595R 517 02- 2022.05
Table of Contents
loading

Related Manuals for Electrolux SkyLine ChillS 202

Summary of Contents for Electrolux SkyLine ChillS 202

  • Page 1 Blast Chillers/Freezers Lengthwise EN-US User Manual 595R 517 02- 2022.05...
  • Page 2 Foreword Read the following instructions, including the warranty terms before installing and using the appliance. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the appliance.

  • Page 3: Table Of Contents

    Contents A WARNING AND SAFETY INFORMATION ......................4 General information ..........................4 Personal protection equipment......................4 General safety ........................... 5 Protection devices installed on the appliance ................... 6 Safety signs to be placed on the appliance or near its area................6 Precautions for use and maintenance .....................

  • Page 4: Awarning And Safety Information

    WARNING AND SAFETY INFORMATION General information To ensure safe use of the appliance and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators.

  • Page 5: General Safety

    Stage Protective Safety footwear Gloves Glasses Safety helmet garments ● ● ● — — Normal use ○ ● — — — Adjustments ○ ● ● ○ — Routine cleaning ˉ ○ ● ● ○ — Extraordinary ˉ cleaning ○ ● ○...

  • Page 6: Protection Devices Installed On The Appliance

    Protection devices installed on the appliance Guards The appliance has: • fixed guards (e.g. casings, covers, side panels, etc.), fixed to the appliance and/or frame with screws or quick-release connectors that can only be removed or opened with tools; therefore the user must not remove or tamper with such devices. The Manufacturer declines any liability for damage due to tampering or their non-use;...

  • Page 7: Product Loading And Unloading

    indicating the personal protection equipment to be used by them. In order to reduce the risks, provide for sufficient spaces while installing the unit. To preserve these conditions, the areas around the appliance must always be: • kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.); •...

  • Page 8: Preventive Maintenance

    • Pay particular attention when handling the core probe; it is a sharp object, therefore handle it very carefully during cleaning. A.13 Preventive Maintenance In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux Professional authorised engineers every 12 months, in accordance with Electrolux Professional Service Manuals. Please contact your local Electrolux Professional Service Centre for further details.

  • Page 9: Bwarranty Terms And Exclusions

    – inadequate or interrupted water supply, steam, air, gas Check on Electrolux Professional website the list of authorized (including impurities and/or other that does not comply with customer care. the technical requirements for each appliance);...

  • Page 10: Testing And Inspection

    • use of the appliance by uninformed and / or untrained personnel; Manufacturer Electrolux Professional SpA or any other service centre authorised by Electrolux • non-application of the current provisions in the country of use, Professional SpA. concerning safety, hygiene and health in the workplace.

  • Page 11: Basic Requirements For Appliance Use

    IMPORTANT • Adequate general basic education and technical knowledge The Customer must make sure his personnel have for reading and understanding the contents of the manual, understood the instructions received and in particular including correct interpretation of the drawings, signs and those regarding work hygiene and safety in use of the pictograms.

  • Page 12: Appliance Main Cycles

    Appliance main cycles Compressor on signalling icon Chill cycle The icon appears when the compressor starts to operate with (temperature range: +10℃; –41℃) pulses. The positive blast chilling cycle is suitable for foods to be It remains on the display until the compressor finishes to consumed within a few days.
  • Page 13 USER – Upper drawer opening: Homepage mode (SkyHub/SoloMio) MAN UAL MAN UAL USER “Homepage“ mode allows you to customize the display menu according to your needs. Manual Automatic Prog rams Graphs (see chapter E.10 Homepage mode (SkyHub/SoloMio)) Chill Chill Hygiene mode °...

  • Page 14: Delayed Start

    – Lower drawer opening: Norms (Reference standards) The appliance can be set in accordance with 4 different standards: • NF (French) • UK (British) Holding Turbo Turbo Norms Guide- speed speed cooling cooling lines • NFS • CUSTOM (defined by user) Delayed Delayed Save...

  • Page 15: Manual Mode

    1. Open the lower drawer and touch the Delayed start icon . 4. If you want the appliance to perform the preparation phase for the delayed cycle, see chapter E.12 Settings mode (Manual ⇨ General, ⇨ ) and enable the feature “Delayed start precooling“...
  • Page 16 4. Precooling (or preheating) starts. If a reference standard changes, time and temperature values change. NOTE! To switch the reference standard, proceed as follow: This phase can be enabled or disabled in chapter – Open lower drawer; E.12 Settings mode (Manual ⇨ General, ⇨ –...
  • Page 17 a. Soft option – Touch the row of the time value; set the new value on the numeric keypad. MAN UAL The default visualisation is in hours and minutes (h:m). °C MAN UAL 01:20 1 2 3 Ha rd Chill Chill °...
  • Page 18 • Insert the core probe in the product without forcing exces- sively and close the door to start the cycle. Turbo Make sure the tip (the sensitive part) is positioned. It is cooling important to place the core probe correctly near the center of the product, making sure the tip does not protrude and, in 1 2 3 Ha rd Chill...
  • Page 19 It is advisable to keep food covered during the cycle in order to How to use MULTIPLE PROBE accessory facilitate chilling. The product must be evenly distributed inside • Touch probe icon. the compartment to ensure good air circulation and therefore A pop-up opens showing the list of all probes available.
  • Page 20 MANUAL 01:20 MANUAL MANUAL • A pop-up window opens. Touch the left part of a row to create a new preset, type the new name on the keypad and confirm. 1 2 3 Hard Chill MAN UAL PRESET NAME ° Chill Chill Preset 1...
  • Page 21 ---- --:--h:m ---- --:--h:m ---- --:--h:m • The appliance shows the most similar presets or the presets ---- --:--h:m compatible with the just set preset. ---- --:--h:m Touch the left part of each rows to recall them and select the ---- --:--h:m required one.

  • Page 22: Multiphase Drawer

    • When the last preset ends and the food is removed, hold MAN UAL MAN UAL Turbo down the button to stop the preset cycle. cooling E.7.2 Multiphase drawer 1 2 3 Chill Turbo cooling Food can be chilled, freezed or cooked in different phases. The appliance enables programmes consisting of several °C °C...

  • Page 23: Automatic Mode

    NOTE! MAN UAL USER The pop-up opens only if the cycle has already started. • Touch Skip icon to leave the current phase and start immediately the selected phase. Chill MAN UAL MAN UAL °C Multiphase Multiphase -20°C 00:00 h:m -20°C 00:00 h:m 0°C...
  • Page 24 AUTOMATIC Meat balls 2. Select a food family. Once modified the cycle with the new parameters, it is Cycle type possible to save it as a preset; Chill Freeze AUTOMATIC Control Food families Timer Probe Meat Poultry Fish Soups Vegetables Pasta and Sauces and Rice...

  • Page 25: Cycles+/Special Cycles

    10. Once Sensing/Temperature recovery phases end, a screen The only cycle mode available is a chill cycle with core probe; saver related to the cycle approach (time or food core AUTOMATIC temperature) appears during the cycle. AUTOMATIC In any case it is possible to customize the screen view by Cruise Chilling MAN UAL means of the bottom drawer.
  • Page 26 To start the cycle proceed as follow: 6. At the end of holding phase, proving cycle starts; 1. Select Retarded Proving cycle; RETARDED PROVING AUTOMATIC RETARDED PROVING Fast thawing Proving Proving Pork loin °C °C Chicken breast 40°C 00:59 40°C Salmon fillet 01:00 01:00 h:m...
  • Page 27 This cycle is performed as a multiphase cycle available only with 4. When cavity preparation is finished, insert the food in the core probe. cavity, the core probe in the food, close the door and the cycle starts. It is possible to choose between two factory presets: 5.

  • Page 28: Programs Mode

    Cycle type Pizza, Chill Chill Freeze Parameter 1 Control Time Probe 3. If needed set the parameters of the probe; 2. Select the required preset; Probe Timer Parameter 2 It is possible to save and store the performed presets from It is possible to choose between several factory presets the lower drawer;...
  • Page 29 How to set a program cycle • Edit the program name on the keypad and confirm. 1. Select Programs mode. The display shows all stored MAN UAL NEW PROGRAM’S NAME programs. Program 1 PROGRAMS MANUAL USER PROGRAMS All programs All programs 1 2 3 4 5 6 7 8 9 0 Chill Manual...
  • Page 30 • Touch the image icon to change the default image; • Touch the recycle bin icon to delete a program and confirm; Choose the required image and confirm it. PROGRAM S USER PROGRAM S USER PROGRAM S USER PICTURE All p rog rams All p rog rams All p rog rams Default picture...
  • Page 31 • select “Local“, “Cloud“ (available only with connectivity Selective delete function devices, installed by specialised personnel), or “All“ to display • Open the drawer to select the programs to be deleted. The list the programs by their source or to display all programs; P G AMS of the programs appear on the display.

  • Page 32: Homepage Mode (Skyhub/Solomio)

    Manage MT Presets • Open the lower drawer and save the program; It is possible to rename/delete the Presets and display the MAN UAL NEW PROGRAM’S NAME information associated to the program which includes them. Program 1 • Touch the corresponding icon. All programs All programs 1 2 3 4 5 6 7 8 9 0...

  • Page 33: Hygiene Mode

    • Select SkyHub mode; – To delete a function touch the icon at the bottom corner. SKYHUB MAN UAL USER SkyHub home Manual Automatic Prog rams Lite Hot Poultry Souvery and Chill sweet bakery ° Skyhub Hygiene Settings Agenda Help User Agenda Transfer...

  • Page 34: Settings Mode

    2. Select the required cycle from the list shown: 5. Touch the button to start the cycle; At the start of the cycle, if the door is closed, a popup HYGIENE window opens showing the message to open the door. Manual Defrosting 00:00 h:m HYGIENE...
  • Page 35 Default setting This setting allows to set the current time. • Set the time format (24H or 12H AM/PM) If it is required to restore the factory setting, proceed ad follows: • Enter the time: touch the corresponding number on the 1.
  • Page 36 • NSF SETTINGS USER SETTINGS Display Guidelines Brightness Guidelines Section Sleep timeout Guidelines predictive check 00 3 : 0 Default guidelines Custom 1 2 3 4 5 6 Enabling the function “Guidelines predictive check“ it is possible to have a prediction of the normative check results already during the first part of the cycle, thanks to the time end estimation algorithm.
  • Page 37 • Skyduo (Match) Programs • USB food probe • Multiple probe selection This setting allows to enable / disable ( ) the Programs mode and the related functions. The functions are divided into General, Local Programs and Manual Cloud Programs: It allows to enable/disable ( ) Manual mode and modify General...

  • Page 38: Help Mode

    Multitimer options: SETTINGS USER • Advanced MT Startup page Download all This activation allows Multitimer advanced feature to show up on the display. Agenda • MT programs Manual Automatic presets This activation allows Multitimer programs to show up on the Automatic Counters display.
  • Page 39 1. Select the agenda function in the upper drawer; • Select the event type (for example Programs); The display shows the list of the stored programs. Select the MAN UAL USER MAN UAL USER required program among the available ones. AGENDA AGENDA Manual...
  • Page 40 • Select the frequency and the event number and confirm; • Type the reminder text in note field and confirm; The display shows in the calendar the selected event at the AGENDA required time. New chef AGENDA AGENDA 11th December 2018 - 15:00 Type December 2018 Meat balls...

  • Page 41: Usb Mode

    Cancellation of an event MANUAL USER USER MANUAL 1. Select an event and touch the icon AGENDA AGENDA AGENDA AGENDA USER December 2018 Germicidal Cycle Meat balls Germicidal Cycle Program’s name 5 11th December 2018 - 08:00 11th December 2018 - 15:00 HH:MM:SS BEGIN: Type...
  • Page 42 • If selecting an existing backup the appliance overwrites the • Expand the required option. All files associated are selected. current one. If selecting Add new name, type it on the appearing keypad. If a file with the new name already exists, a popup window Download Programs selection...

  • Page 43: Skyduo/Match Mode (Depending On Your Model - Optional)

    E.16 SkyDuo/Match mode (depending on your • Expand the required option; model - optional) • Select and expand the required backup from the list. This option can be activated on demand. It works with a Wi-Fi or USER Ethernet connection, installed by an authorized technician and Programs Programs Upload selection...

  • Page 44: Fmachine Cleaning And Maintenance

    Some minutes before the oven cycle ending, precooling USER USER AUTOMATIC AUTOMATIC cycle starts to prepare the blast chiller cavity for the food Meat Meat just cooked. Touch the to stop the process. SkyDuo Touching the icon , it is possible to postpone the connection Parameter 1 Parameter 1 with the oven.

  • Page 45: Ordinary Maintenance

    CAUTION Ordinary maintenance Do not use boiling water to clean the core F.1.1 Care information probe. Care operations have to be carried out by the owner and/or user • Tray supports and internal structure of the appliance. The tray supports and internal structure are removable and IMPORTANT washable in dishwasher.

  • Page 46: Precautions In Case Of Long Idle Periods

    • Drain plug detecting any visual or tactile characteristic change on surfaces and thoroughly rinse with water (examples: plastic To clean the drain plug, remove it as shown in the figure discoloring/melting/other, or metal showing rust/stains/ below: scratches). Carefully dry after rinsing. F.1.4 Precautions in case of long idle periods If the appliance is not going to be used for some time, take the...
  • Page 47 TYPE OF CODE DESCRIPTION POSSIBLE CAUSES ACTIONS ANOMALY • CALL SERVICE • 6GN 1/1 models (1 evaporator fan): unit stops and cannot operate until ALARM fixing the problem Stops Machine • Other models (more than 1 evapora- • Parameter wrong setting in 6GN 1/1 Top evaporator tor fan): unit continues working with...
  • Page 48 TYPE OF CODE DESCRIPTION POSSIBLE CAUSES ACTIONS ANOMALY • Position of condenser probe is This failure blocks also running cycle. not correct • Quickly remove the load from the • Fan condenser not working cavity for preventing waste of food. ALARM Condenser high •...
  • Page 49 TYPE OF CODE DESCRIPTION POSSIBLE CAUSES ACTIONS ANOMALY • Current running cycle: a) the cycle continues in probe mode until at least one out of the 6 food probe points is working. b) the cycle switches to time mode if ALARM •...
  • Page 50 TYPE OF CODE DESCRIPTION POSSIBLE CAUSES ACTIONS ANOMALY • ACU board not programmed or • Communication protocol error ALARM ACU protocol programmed with an incompati- detected. ACUP error Stops machine ble Software version • If the problem persists, Call Service. •...

  • Page 51: H Further Information

    NOTE! The appliance PNC and serial number are essential for identifying the type of appliance and date of manufacturer. FURTHER INFORMATION Ergonomic features H.1.1 Certification The ergonomic features of your product, that may influence your physical and cognitive interaction with it, have been assessed and certified.
  • Page 52 5 Kg 5 Kg <15 Kg 10 Kg 10 Kg <10 Kg 15 Kg 15 Kg <5 Kg <3 Kg Blast Chiller 50Kg Oven 10G + Base 5 Kg 5 Kg 10 Kg 10 Kg <15 Kg <10 Kg 15 Kg 15 Kg <5 Kg <3 Kg...
  • Page 53 3 Kg 5 Kg 5 Kg 10 Kg 10 Kg <15 Kg <10 Kg <5 Kg 15 Kg <3 Kg 10 Kg 10 Kg 5 Kg 5 Kg 3 Kg Blast Chiller 30Kg + Oven 6G Oven 6G + Oven 10G H.1.2.1 Recommendations on accessories •...
  • Page 56 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electroluxprofessional.com...

This manual is also suitable for:

Skyline chills 201Skyline chills 102Skyline chills 101Skyline chills 61727731727738 ... Show all

Table of Contents