Exporting Logs - Cisco 1120 Installation Manual
Secure access control server
Hide thumbs
Also See for 1120:
- Hardware installation (98 pages) ,
- Quick start manual (10 pages) ,
- Installation manual (6 pages)
Table of Contents
Working with System Data
Step 6
At the
to which you want to send the file, and press Enter.
Step 7
At the
Performing this next step begins the procedure that stops and restarts all services, and will interrupt use
Caution
of the ACS.
At the
Step 8
Result: The console displays a series of messages detailing the writing and dumping of the files, and the
stopping and starting of services. At file transfer conclusion the system displays the following message
on the console:
Transferring 'Package.cab' completed
Press any key to finish.
This message indicates that ACS has packaged and transferred the .cab file as specified, and restarts
services.
Result: The system returns to the system prompt.
Exporting Logs
This section details the procedure for exporting ACS log files to an FTP server for further examination
and processing. Using the exportlogs command, you can enter the name of the log(s) or to export, or
select log names from a list.
Before You Begin
You must have the FTP server address and pathname, as well as the proper credentials for writing to the
FTP server (username and password).
Caution
Performing this procedure stops and restarts all services, and will interrupt use of the ACS .
To export log files to an FTP server:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
Where logname is the name of the log you want to export.
Tip
Performing this procedure stops and restarts all services, and will interrupt use of the ACS.
Caution
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
4-10
Enter FTP Server Directory:
Enter FTP Server Username:
Enter FTP Server Password:
exportlogs
You can enter more than one log name and separate each with a space. If you enter no log name,
and press Enter, the system displays the names of the log files available for export.
Chapter 4
Administering the Cisco 1120 Secure Access Control Server
prompt, enter the pathname to the location on your FTP server
prompt, enter the FTP server username, and press Enter.
prompt, enter the FTP server password, and press Enter.
Logging In to the CSACS 1120 from a Serial
logname, and press Enter.
OL-19455-01
Hide quick links:
Table of Contents
Troubleshooting
