Sony EVI-HD7V Service Manual page 77
Hd color video camera
Hide thumbs
Also See for EVI-HD7V:
- Operating instructions manual (92 pages) ,
- Technical manual (40 pages) ,
- Brochure (8 pages)
Table of Contents
(5) The measuring result and error code are returned to Response Window after completing measure-
ments. (Refer to Table 1) When error code 00h appears, measurements are completed normally. Then
data is stored in EEPROM and a camera restarts automatically.
n
When an error code other than 00h appears, it is caused by the adjustment operation failure or abnor-
mal camera condition. (Refer to Table 2) If required, perform repair and readjustment. When turning
off the power once, repeat the above steps (1) to (5).
Command
81 01 06 09 FF
Reply
90 41 FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 50 0p 0q 0r 0s FF
90 51 xx FF
EVI-HD7V
Ack
Data 1
Pan MR DC level pq = FG0, rs = FG1
Data 2
Tilt MR DC level pq = FG0, rs = FG1
Data 3
Pan MR amplitude pq = FG0, rs = FG1
Data 4
Tilt MR amplitude pq = FG0, rs = FG1
Data 5
pqrs = 0000
Data 6
pqrs = Pan reset sensor (right) position
Data 7
pqrs = Pan mechanical termination point distance
Data 8
pqrs = 0000
Data 9
pqrs = Tilt reset sensor (low) position
Data 10
pqrs = Tilt mechanical termination point distance
Completion
xx = Error code (Refer to Table 2)
Table 1 Pan and tilt adjustment
2-47
Table of Contents
