Sony EVI-D100 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. EVI-D100 (NTSC)
  6. Service manual

Sony EVI-D100 Service Manual

Color video camera
Hide thumbs Also See for EVI-D100:
Table of Contents

Quick Links

COLOR VIDEO CAMERA
EVI-D100
EVI-D100C
EVI-D100CP
EVI-D100P
SERVICE MANUAL
1st Edition (Revised 2)
Table of Contents
loading

Related Manuals for Sony EVI-D100

Summary of Contents for Sony EVI-D100

  • Page 1 COLOR VIDEO CAMERA EVI-D100 EVI-D100C EVI-D100CP EVI-D100P SERVICE MANUAL 1st Edition (Revised 2)
  • Page 2 Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres. Pour toute réparation faire appel à une personne compétente uniquement. EVI-D100/EVI-D100P...
  • Page 3 équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. ADVARSEL! Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. 1 (P) EVI-D100/EVI-D100P...

  • Page 5: Table Of Contents

    Connection for Adjustment ............2-3 2-1-3. Control Software Adjustment ............ 2-4 2-1-4. Precaution ................... 2-5 2-1-5. Adjusting Remote Commander ..........2-6 2-1-6. Data Processing ................2-7 2-2. Initialization of D, E, F, Page Data ............. 2-8 2-3. Camera Adjustments ................. 2-16 EVI-D100/EVI-D100P...
  • Page 6 SW-1074 Board ................... 3-3 3-5-1. Switch Block ................3-3 4. Semiconductor Pin Assignments 5. Spare Parts 5-1. Notes on Repair Parts .................. 5-1 5-2. Exploded Views ..................5-2 5-3. Electrical Parts List ..................5-8 5-4. Packing Materials & Supplied Accessories ..........5-16 EVI-D100/EVI-D100P...
  • Page 7 VC-266/VC-266P ................... 6-30 6-4. Board Layouts ................... 6-33 CD-336 ....................6-33 DD-161/DD-161P ................... 6-33 IF-834 ....................6-34 MC-134 ....................6-35 MDR-16 ....................6-36 MDR-17 ....................6-37 SE-616 ....................6-38 SW-1074 ....................6-38 VC-266/VC-266P ................... 6-39 VECTORSCOPE SCALE VECTORSCOPE SCALE ..............6-39 EVI-D100/EVI-D100P...

  • Page 9: Manual Structure

    Manual Structure Purpose of this manual This manual is the Service Manual of the Color Video Camera EVI-D100/D100C/ D100CP/D100P. This manual contains the adjustments, circuit functions, semiconductor pin assignments, spare parts and diagrams. Related manuals In addition to this Service Manual the following manual is provided.

  • Page 11: Service Overview

    B while opening it in the direction indicated by the arrow A. SW-1074 board Pan cabinet (side) SE-616 board IF-834 board MDR-16 board MDR-17 board 2. Attach the pan cabinet (side) in the reverse order of step 1. EVI-D100/EVI-D100P...

  • Page 12: Pan Cabinet (Front)

    When attaching the pan cabinet (rear), make sure to firmly to the groove (inside) of the pan cabinet (front). attach the portion C to the groove (inside) of the pan . When attaching, be careful not to pinch the flexible flat cabinet. cable. EVI-D100/EVI-D100P...

  • Page 13: Camera Cabinet (Upper/Lower)

    B. 5. Attach the camera cabinet (upper/lower) in the reverse order of steps 1 to 4. When attaching, make sure to firmly insert the six projections of the camera cabinet (upper/lower) into the groove of the camera cabinet (front). EVI-D100/EVI-D100P...

  • Page 14: Cabinet Base (Front)

    Cabinet base (rear) Cabinet base (front) 5. Attach the cabinet base (front) in the reverse order of steps 1 to 4. M 2.6x6 M 2.6x6 6. Attach the cabinet base (rear) in the reverse order of steps 1 to 5. EVI-D100/EVI-D100P...

  • Page 15: Camera Block

    11. Remove the shaft boss while holding the camera block with your hand, then remove the camera block. Torque driver Flexible flat cable Shaft boss Holder Hexagonal Lock DD-161 board Hexagonal- head screws (2x3) Camera Bracket (L) block Coupling Flexible flat cable Shaft boss 2.6x4 DC motor EVI-D100/EVI-D100P...

  • Page 16: Replacement Of Board

    DD-161 board (DD-161P) Flexible flat cable Connectors Flexible flat cable Connectors 6. Attach the DD-161 (DD-161P) board in the reverse order of steps 1 to 5. 9. Attach the MDR-17 board in the reverse order of steps 1 to 8. EVI-D100/EVI-D100P...

  • Page 17: Vc-266P) Board

    VC-266 (VC-266P) board Portion A Flexible flat cable Flexible flat cables 9. Attach the VC-266 (VC-266P) board in the reverse order of steps 1 to 8. 9. Attach the MC-134 board in the reverse order of steps 1 to 8. EVI-D100/EVI-D100P...

  • Page 18: Board

    2. When attaching the lens, hook the lens on the three hooks of the camera bracket, then turn the lens in the direction indicated by the arrow D until it locks. EVI-D100/EVI-D100P...

  • Page 19: Rear Board Assembly

    Harness connectors on the IF-834 board. CN chassis Rear board assembly Connectors Connector IF-834 board IF-834 board Flexible flat cables Base plate 12. Attach the rear board assembly in the reverse order of steps 1 to 11. M 2.6x4 EVI-D100/EVI-D100P...

  • Page 20: Mdr-16/Se-616 Boards

    Connector from the six connectors on the MDR-16 board. M 2x3 Harness 2.6x4 11. Attach the MDR-16/SE-616 boards in the reverse order of steps 1 to 10. 2.6x4 Flexible flat cables Connectors MDR-16 board Connectors Harness Base chassis 1-10 EVI-D100/EVI-D100P...

  • Page 21: Flexible Flat Cable

    13. Remove the three screws (2.6x4), then remove the cable guide assembly. 2.6x4 Hook Projections Cable guide assembly DC motor Flexible flat cable Cable retainer Fig.A 14. Connect the flexible flat cable in the reverse order of steps 1 to 13. 1-11 EVI-D100/EVI-D100P...
  • Page 22 2. After replacing the flexible flat cable, bend it at the +1.5 position of 32 mm from the top of the tilt chassis. (Refer to Fig. B) Flexible flat cable Bend To DD-161 board +1.5 Tilt chassis Fig.B 1-12 EVI-D100/EVI-D100P...

  • Page 23: Judge For No Video Picture Output

    1. Turn the switch S001 to ON. 2. The video output picture becomes blue. 3. After 5 seconds, the video output changes from all blue to Full Auto output. 4. If items 2 and 3 are satisfied, camera block is all right. 1-13 EVI-D100/EVI-D100P...

  • Page 25: Adjustments

    In this case, replace with the new microprocessor (8-759-148-35). J-6432-960-B FCB/EVI CONTROL INTERFACE TOOL J-6433-090-A FLEXIBLE HARNESS (20P) J-6080-808-A ND Filter 1.0 J-6080-818-A ND Filter 0.3 ..White Balance Check EVI-D100/EVI-D100P...
  • Page 26 ..For checking the flange back . Digital Voltmeter . Vectorscope . Waveform Monitor . Color Monitor . Control Software EVI-D100/10PL Control Soft (J-6432-610-A) J-6080-058-A Color Temperature Correction Filter C14 ..Auto white balance adjustment .

  • Page 27: Connection For Adjustment

    2-1-2. Connection for Adjustment Adjustment commander MC-134 board (J-6082-053-B) CN702 S VIDEO VIDEO VISCA IN VISCA OUT Relay tool for adjustment commander (J-6431-930-A) DC IN 12V AC adaptor (MPA-AC1) Waveform Color monitor Vectorscope monitor Personal computer 75 Z termination RS-232C cable EVI-D100/EVI-D100P...

  • Page 28: Control Software Adjustment

    The control system of the camera is adjusted using the software installed in a PC (personal computer). Name of the software EVI-D100/10PL Control Soft (J-6432-610-A) PC to use The PC in which Microsoft Windows® NT3.5, 4.0 Win- dows® 2000/XP operates.

  • Page 29: Precaution

    Combine a white A0 size (1189 mm x 841 mm) paper to a black one, and make the chart shown in figure. Use the non-reflecting and non-glazing vellum paper whose size is more than A0, and make the boundary between white and black to be smoothly flat. EVI-D100/EVI-D100P...

  • Page 30: Adjusting Remote Commander

    0 1 2 3 4 5 6 7 8 9 A b c d E F LCD Display Decimal notation 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 conversion value EVI-D100/EVI-D100P...

  • Page 31: Data Processing

    (Example) In the case that the DDS display and the adjusting remote commander display are BD (bd). As the upper digit of the hexadecimal notation is B (b), and the lower digit is D (d), the intersection “189” of the 1 and 2 in the above table is the decimal notation to be calculated. EVI-D100/EVI-D100P...

  • Page 32: Initialization Of D, E, F

    When changing the data, copy the data built in the performed again. . < > : NTSC model (EVI-D100/D1000) same model. [ ] : PAL model (EVI-D100P/D100CP) If copy the data built in the different model, the Adjusting page camcorder may not operate.
  • Page 33 Fixed data-1 (Initialized data) Fixed data-1 (Initialized data) Fixed data-2 (Modified data, copy the data built in the same model.) Fixed data-2 (Modified data, copy the data built in the same model.) Fixed data-1 (Initialized data) EVI-D100/EVI-D100P...
  • Page 34 (Modified data, copy the data Fixed data-2 : Modified data. built in the same model.) (Refer to “2. Modification of D, E, F Page Data”). Fixed data-1 . NTSC model : EVI-D100/D100C PAL model : EVI-D100P/D100CP (Initialized data) Address Initial Value...
  • Page 35 Fixed data-2 Fixed data-1 AWB standard data input adj. Y OUT level adj. Fixed data-1 Fixed data-1 C OUT level adj. Fixed data-1 Flange back adj. Fixed data-2 Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 2-11 EVI-D100/EVI-D100P...
  • Page 36 Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 2-12 EVI-D100/EVI-D100P...
  • Page 37 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-2 Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-2 Fixed data-1 Fixed data-1 Color reproduction adj. Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 2-13 EVI-D100/EVI-D100P...
  • Page 38 Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-2 Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 76 to 99 2-14 EVI-D100/EVI-D100P...
  • Page 39 Address Initial Value Remark Address Initial Value Remark NTSC PAL NTSC PAL Fixed data-1 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-1 Fixed data-2 Fixed data-2 Fixed data-1 2-15 EVI-D100/EVI-D100P...

  • Page 40: Camera Adjustments

    Pin != of IC105 : Specified Value f = 14.318181 MHz ± 68 Hz (NTSC) f = 14.187500 MHz ± 68 Hz (PAL) NTSC Model: EVI-D100/D100C PAL Model: EVI-D100P/D100CP Adjusting method 1) Select page: 0, address: 01, and set data: 01.
  • Page 41 A = 286 ± 5 mV (NTSC) A = 286 ± 5 mV (NTSC) Specified Value Specified Value A = 300 ± 5 mV (PAL) A = 300 ± 5 mV (PAL) NTSC Model: EVI-D100/D100C NTSC Model: EVI-D100/D100C PAL Model: EVI-D100P/D100CP PAL Model: EVI-D100P/D100CP Terminate at 75 Z resistor and measure.
  • Page 42 13) Read the DDS display data, and this data is named W 14) Convert W , to decimal notation, and obtain W ’ , W ’ , K ’ , K ’. (Refer to page 2-7 “Hexadecimal notation - decimal notation conversion table”.) 2-18 EVI-D100/EVI-D100P...
  • Page 43 PAUSE button. 2) Select page: 2, address: 01, and set data: 00, and press the PAUSE button. 3) Select page: 0, address: 03, and set data: 00. 4) Select page: 0, address: 01, and set data: 00. 2-19 EVI-D100/EVI-D100P...
  • Page 44 1) Select page: 2, address: 21, and set data: 00. 2) Select page: 0, address: 03, and set data: 00. 3) Select page: 2, address: 40, and set data: 00. 4) Select page: 2, address: 41, and set data: 00. 2-20 EVI-D100/EVI-D100P...
  • Page 45 “Color bar chart standard picture frame”. 1.Horizontal period 2.Vertical period t = 0 ± 0.1 mesc Color bar chart picture frame TV monitor picture frame 2-21 EVI-D100/EVI-D100P...
  • Page 46 All color luminance points should settle within each color reproduction frame. (Last page of this manual) Burst position NTSC model: EVI-D100/D100C PAL model: EVI-D100P/D100CP Adjusting method 1) Select page: 0, address: 01, and set data: 01. For PAL model 2) Select page: 2, address: 01, set data: 3D, and press the PAUSE button of the adjusting remote commander.
  • Page 47 11) Select page: 2, address: 01, set data: 09, and press the PAUSE button of the adjusting remote commander. 12) Read the DDS display data (*), and take the upper two digits as D and the lower two as D 2-23 EVI-D100/EVI-D100P...
  • Page 48 3) Select page: 2, address: 40, and set data: 00. 4) Select page: 2, address: 56, and set data: 00. 5) Select page: 0, address: 03, and set data: 00. 6) Select page: 0, address: 01, and set data: 00. 2-24 EVI-D100/EVI-D100P...
  • Page 49 2) Select page: 2, address: 01, and set data: 00, and press the PAUSE button of the adjusting remote commander. 3) Select page: 0, address: 03, and set data: 00. 4) Select page: 0, address: 01, and set data: 00. 2-25 EVI-D100/EVI-D100P...
  • Page 50 Figure C. 3 mm Processing after Completing Adjustments 2.0 mm 1) Select page: 2, address: 01, and set data: 00, and press 3 mm the PAUSE button of the adjusting remote commander. 1.0 mm Figure C 2-26 EVI-D100/EVI-D100P...

  • Page 51: Pan-Tilt Adjustment

    . Transmission at 81090002FF (Inquiry of model name and version) Command of 90500001040Dpqrs02FF is returned to Response Window. Version number means at pqrs. (Example: 0102 = Ver. 1.02) 2-27 EVI-D100/EVI-D100P...

  • Page 52: Adjusting Method

    When data is already written in EEPROM, pan and tilt keep staying at HOME positions. Therefore, execute step (4) while hold a camera head by hand and fix it to above position described in step (3). Afterward, release the hand from a camera head immediately. 2-28 EVI-D100/EVI-D100P...
  • Page 53 Data 9 pqrs=Tilt reset sensor (top) position 90 50 0p 0q 0r 0s FF Data 10 pqrs=Tilt mechanism termination point distance 90 51 xx FF Completion xx=Error code (Refer to Table 2) Table 1 Pan and Tilt Adjustment 2-29 EVI-D100/EVI-D100P...
  • Page 54 Incorrect distance between top sensor and top termination EEPROM Write failure . EEPROM failure . EEPROM communication failure error Read failure/Abnormal data . Failure of camera block connection HI communication error Table 2 Error Code Table of Pan and Tilt Adjustment 2-30 EVI-D100/EVI-D100P...
  • Page 55 EEPROM. When error code appears except 0h, it may cause by failure of adjustment operation or a camera operates abnormally. If required, perform repair and readjustment. When turn off the power once, repeat above steps (1) to (4). 2-31 EVI-D100/EVI-D100P...
  • Page 56 When error code appears except 00h or 01h, it may cause by failure of adjustment operation or a camera operates abnormally. If required, perform repair and readjustment. When turn off the power once, repeat above steps (1) to (6). 2-32 EVI-D100/EVI-D100P...

  • Page 57: Operation Test

    02h: Large torque load applying in stop position When unusual occurs in the time required, maximum speed or error code, it may cause failure of the motor or motor drive circuit (insufficiency of torque), or pan rotating mechanism unusually (large friction) etc,. 2-33 EVI-D100/EVI-D100P...
  • Page 58 (2) Transmission at 8101060218140F0A060000000000FF (Moving of pan and tilt) When command of 9041FF is returned to Response Window, move the pan at left side position and tilt at HOME position. Therefore, wait until pan and tilt are stopped and 9051FF is returned. 2-34 EVI-D100/EVI-D100P...
  • Page 59 90 50 0p 0q 0r 0s FF Data 5 pqrs=Speed dispersion value (High bite: Integral, Low bite: decimal) 90 51 xx FF Completion xx=Error code 01: Stop during operation 02: Too large torque load Table 5 Pan and Tilt Low Speed Operation Test 2-35 EVI-D100/EVI-D100P...

  • Page 60: Processing After Completing Adjustments

    Commands of 9041FF and 90510p0q0r0sFF are returned to Response Window. The product month and day becomes rs (day) and pq (month). As product date is equivalent to the produced date of the unit in the factory, so it is differ to purchase date of the customer. 2-36 EVI-D100/EVI-D100P...

  • Page 61: Circuit Operation Functions

    IC1105. A voltage of 5.5 V is used to drive a motor and produce 5.0 V and 3.3 V and changed 5.0 V using IC1102. A voltage of 5.0 V is used for a remote controller and MR amplification-related block and changed to 3.3 V using IC1103 and Q1111. A voltage of 3.3 V is used for a microcomputer system. EVI-D100/EVI-D100P...

  • Page 62: Pan Motor Control Circuit

    A microcomputer (IC1101) performs internal communication with a camera block microcomputer at pins 31, 53, 55, and 57 so as to set the camera state. The microcomputer exchanges an image mute signal at pin 36, a wakeup signal at pin 35, and a reset signal at pin 37. EVI-D100/EVI-D100P...

  • Page 63: Backup Circuit

    PH1402) and sent to the microcomputer (IC1101) on the MDR-16 board. 3-5. SW-1074 Board 3-5-1. Switch Block Switch S201 for data saving switches the battery backup ON/OFF operation. Switch S202 switches channels 1, 2, and 3 of a remote controller. EVI-D100/EVI-D100P...
  • Page 65 In addition, for semiconductors with ID Nos., refer to the separate CD-ROM titled “Semiconductor Pin Assignments” (Sony Part No. 9-968-546-06) that allows searching for parts by semiconductor type or ID No. The semiconductors in the manual or on the CD-ROM are listed by equivalent types.
  • Page 66 S-8423YFS-T2 ............S-8423YFS-T2 S579624PZ-TEB ........... S579624PZ-TEB TA75S01F ............... TA75S01F TA75S01F(TE85R) ............TA75S01F TC4W66FU(TE12R) ............TC4W66F TC74HC4053AFT(EL) ..........MC74HC4053F TC74VHC08FT(EL) ............. TC74HC08P TC74VHC32FT(EL) ............. TC74HC32P TC7SET08FU(TE85R) ............TC7S08F TC7SH04FU ..............TC7S04F TC7SH04FU-TE85R ............TC7S04F TL1451ACPWR-12 ............TL1451CNS TL431CPK-E2 ..............NJM431U EVI-D100/EVI-D100P...
  • Page 67 IN2A IN2B OUT2A OUT2B CHARGE OUT1A PUMP BRIDGE OUT1B LVDET P.GND1 : LOW LEVEL IN1A HIGH LEVEL HIGH IMPEDANCE IN1B DON'T CARE OUT2A BRIDGE IN2A OUT2B IN2B P.GND2 L.GND RPM6938 (ROHM) PHOTO DETECT IC COMP. DETECTOR CONVERSION TRIMMING CIRCUIT EVI-D100/EVI-D100P...
  • Page 68 CONVERTER P31/TxD1 TIOC INPUT CAPTURE/OUTPUT COMPARE MATCH IRQ0 P30/TxD0 P64/ TEND1 IRQ4 P63/ CONVERTER P50/T OTHERS DREQ1 P62/ IRQ5 REFERENCE VOLTAGE P51/R TEND0/CS5 IRQ5 P61/ P52/SCK2/ DREQ0/CS4 ADTRG P60/ P53/ IRQ7 WAIT BREQO PORT 1 PORT 2 PORT 4 EVI-D100/EVI-D100P...
  • Page 69 S-817A36ANB-CUZ-T2 (SEIKO INSTR) 3-TERMINAL POSITIVE VOLTAGE REGULATOR —TOP VIEW— V OUT V IN V OUT V IN V OUT V IN V REF SHORT PROTECTION CIRCUIT EVI-D100/EVI-D100P...

  • Page 71: Spare Parts

    Therefore, specified parts should be used in the case of replacement. 2. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit. These are because of parts common- ality and improvement. Parts list has the present standardized repair parts.

  • Page 72: Exploded Views

    Camera Block 5-2. Exploded Views TO MAIN CHASSIS ASSY TO MDR-16 CN1101 SET-SCREW, HEX 2x3 SET-SCREW, HEX 2x3 PTP 2x5 TO MAIN CHASSIS ASSY PTP 2x5 EVI-D100/EVI-D100P...
  • Page 73 Camera Block Part No. SP Description *1:EVI-D100 (UC) *2:EVI-D100P (CE) *3:EVI-D100P (CN) *4:EVI-D100C (SY) *5:EVI-D100CP (CE) *1*4 A-7031-254-A s CCD BLOCK ASSY *2*3*5 A-7031-052-A s CCD BLOCK ASSY A-7074-801-A s MOUNTED CIRCUIT BOARD, MC-134 A-7074-802-A s MOUNTED CIRCUIT BOARD, CD-336...
  • Page 74 Main Chassis Block 1 CAMERA ASSY CAMERA ASSY SCREW, PTP 2x4 EVI-D100/EVI-D100P...
  • Page 75 3-647-941-03 o RETAINER,PC BOARD 3-647-942-02 o BOSS,SHAFT 3-941-343-21 s TAPE(A) (28X9) 4-644-492-21 s ACE (M2), LOCK 4-644-492-72 s ACE (M2), LOCK 4-644-493-11 s ACE (M2.6), LOCK 8-835-740-12 s MOTOR, DC SPZ12A/C-NP 3-647-972-02 s CHASSIS, TILT 7-685-102-19 s SCREW +PTP2X4 EVI-D100/EVI-D100P...
  • Page 76 Main Chassis Block 2 EVI-D100/EVI-D100P...
  • Page 77 3-647-943-01 o RUBBER,HEAT RESISTING 3-740-607-01 s CUSHION (PLA) 3-906-376-01 s SCREW (2.6X6) 3-952-317-01 s BUTTON, DBB 3-968-729-52 s SCREW (M2), LOCK ACE, P2 4-644-492-71 s ACE (M2), LOCK 4-644-493-11 s ACE (M2.6), LOCK 8-835-739-12 s MOTOR, DC SPZ11A/C-NP 3-704-978-02 s CHASSIS, BASE EVI-D100/EVI-D100P...

  • Page 78: Electrical Parts List

    5-3. Electrical Parts List ------------ ----------------- CD-336 BOARD DD-161/161P BOARD ------------ ----------------- Ref. No. *1:EVI-D100 (UC) or Q’ty Part No. SP Description *2:EVI-D100P (CE) *3:EVI-D100P (CN) A-7074-802-A s MOUNTED CIRCUIT BOARD, CD-336 *4:EVI-D100C (SY) *5:EVI-D100CP (CE) C001 1-113-987-11 s CAPACITOR TANTALUM 4.7MF/25V C003 1-107-826-11 s CAPACITOR,CHIP CERAMIC 0.1MF...
  • Page 79 Q101 6-550-112-01 s TRANSISTOR TPC8108(TE12L) R101 1-218-939-11 s RESISTOR, CHIP 68 1/16W (1005) R102 1-218-969-11 s RESISTOR,CHIP 22K 1/16W (1608) R103 1-218-957-11 s RESISTOR,CHIP 2.2K 1/16W(1608) R104 1-218-953-11 s RESISTOR, CHIP 1K 1/16W R106 1-216-864-11 s CONDUCTOR, CHIP (1608) EVI-D100/EVI-D100P...
  • Page 80 1-218-965-11 s RESISTOR, CHIP 10K 1/16W IC702 8-759-671-74 s IC S579624PZ-TEB R721 1-218-965-11 s RESISTOR, CHIP 10K 1/16W L401 1-414-400-11 s INDUCTOR, 22UH R722 1-218-965-11 s RESISTOR, CHIP 10K 1/16W L402 1-414-754-11 s INDUCTOR 10.0UH R723 1-218-965-11 s RESISTOR, CHIP 10K 1/16W 5-10 EVI-D100/EVI-D100P...
  • Page 81 1-109-935-11 s CAPACITOR TANTALUM 4.7MF/6.3V C1158 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF C1159 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF C1160 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF C1161 1-119-667-11 s CAPACITOR CERAMIC 22MF/10V(F) C1162 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF C1163 1-164-943-11 s CAPACITOR,CHIP CERAMIC 0.01MF 5-11 EVI-D100/EVI-D100P...
  • Page 82 Q1123 8-729-029-14 s TRANSISTOR DTC144EUA-T106 FB1105 1-500-282-11 s INDUCTOR, FERRITE BEAD Q1124 8-729-905-35 s TRANSISTOR 2SC4081-R IC1102 8-759-533-85 s IC L88M05T-FA-TL R1104 1-218-977-11 s RESISTOR,CHIP 100K 1/16W(1005) IC1103 8-759-183-53 s IC TL431CPK-E2 R1105 1-218-977-11 s RESISTOR,CHIP 100K 1/16W(1005) 5-12 EVI-D100/EVI-D100P...
  • Page 83 1-218-965-11 s RESISTOR, CHIP 10K 1/16W R1171 1-218-973-11 s RESISTOR,CHIP 47K 1/16W (1005) R1172 1-218-990-11 s RESISTOR,CHIP 0 1/16W (1005) R1173 1-218-973-11 s RESISTOR,CHIP 47K 1/16W (1005) R1174 1-218-990-11 s RESISTOR,CHIP 0 1/16W (1005) R1175 1-218-965-11 s RESISTOR, CHIP 10K 1/16W 5-13 EVI-D100/EVI-D100P...
  • Page 84 1-218-973-11 s RESISTOR,CHIP 47K 1/16W (1005) R1313 1-208-939-11 s RESISTOR, CHIP 150K (1005) R1314 1-208-939-11 s RESISTOR, CHIP 150K (1005) R1315 1-208-703-11 s RESISTOR,CHIP 6.8K 1/16W(1005) R1316 1-208-703-11 s RESISTOR,CHIP 6.8K 1/16W(1005) R1317 1-208-683-11 s RESISTOR CHIP 1K 1/16W (1005) 5-14 EVI-D100/EVI-D100P...
  • Page 85 ----------------- VC-266/266P BOARD (VC-266/266P BOARD) ----------------- *1:EVI-D100 (UC) Ref. No. *2:EVI-D100P (CE) or Q’ty Part No. SP Description *3:EVI-D100P (CN) *4:EVI-D100C (SY) IC105 8-752-384-70 s IC CXD2486R *5:EVI-D100CP (CE) IC106 8-759-575-74 s IC AD9828JSTRL IC201 8-759-578-34 s IC MB87F4090PFF-G-BND Ref. No.

  • Page 86: Packing Materials & Supplied Accessories

    5-4. Packing Materials & Supplied Accessories ---------------------------------------- PACKING MATERIALS & SUPPLIED ACCESSORIES ---------------------------------------- *1:EVI-D100 (UC) *2:EVI-D100P (CE) *3:EVI-D100P (CN) Ref. No. or Q’ty Part No. SP Description *1*2*3 1-468-626-67 s ADAPTOR, AC *1*2*3 1-476-990-21 s REMOTE COMMANDER 1pc *2 1-575-131-61 s CORD, POWER...

  • Page 87: Diagrams

    Section 6 Diagrams 6-1. Board Location DD-161 board CD-336 board DD-161P board VC-266 board VC-266P board MC-134 board SW-1074 board FP-234 board MDR-17 board IF-834 board MDR-16 board SE-616 board EVI-D100/EVI-D100P...

  • Page 88: Block Diagrams

    6-2. Block Diagrams CD-336 BOARD VC-266/266P BOARD IC106 1.3Vp-p IC001 IC001 1.3Vp-p IC102 CAMERA REC IC105 3.2Vp-p 0.14usec IC502 — 7Vp-p IC001 (IC201) 7Vp-p IC001 2.3Vp-p X101 NTSC:28.6363 14.32 MHz PAL:28.375 IC101 11 12 (IC702 3Vp-p IC101 3Vp-p IC101 EVI-D100/EVI-D100P...
  • Page 89 MECHA_VD MECHA_FLD VC_SI XVC_SCK VC_SO XCS_TANVKI XRST_TANVKI OSD_SO XCS_OSD XOSD_SCK XSYS_RST IRIS_COM 3Vp-p DIR1B IC202 IC202 DIR1A DIR0B 0.34Vp-p 3Vp-p DIR0A IC201 IC202 ZM_RST FC_RST CAM_Y 0.84Vp-p CAM_C IC201 3.2Vp-p 7.16 MHz IC202 0.9Vp-p IC201 3Vp-p IC201 CD-336 VC-266/266P EVI-D100/EVI-D100P...
  • Page 90 FL301 LINE IN2(Y) TITLE PB/EE INSERT MUTE CLAMP CAM_Y DUMMY SYNC EE IN VREG V REG CAM_C COMP OUT1 TITLE LINE IN1(Y) INSERT MUTE CLAMP COMP INV IN1 DUMMY SYNC TITLE GND2 GND1 INSERT Y INV IN1 MUTE DD-161/161P EVI-D100/EVI-D100P...
  • Page 92 MC-134 MC-134 MC-134 BOARD IC602 1.7Vp-p 20 MHz IC602 3Vp-p 13µsec IC602 IC402 CN401 M904 IRIS MOTOR IC402 IC402 IC402 IC603 IC401 IC601 EVI-D100/EVI-D100P...
  • Page 93 KEY AD0 SYS V DO_ON XSYS_RST 2.0V IRIS_COM 2.0V XCS OSD 3.2V DIR1B 3.2V OSD SO DIR1A 4.9V XOSD SCK DIR0B -7.0V DIR0A ZM_RST CAM DDON FC_RST VTR DDON CAM_Y UNREG CAM_C IR ON LANC OUT LANC IN MC-134 EVI-D100/EVI-D100P...
  • Page 94 IF-834 (1/2) IF-834 (1/2) CN102 22P CN103 2P TXD OUT CN107 4P RXD OUT Y-OUT C OUT C-OUT Y OUT VBS OUT CN104 2P VBS OUT IF-834 (1/2) EVI-D100/EVI-D100P...
  • Page 95 SIRCS TH OUT SW-1074 BOARD CN108 7P CN108 7P 3.3V 3.3V S202 CATEGORY 1 CATEGORY 1 IR SELECT SW CATEGORY 2 CATEGORY 2 BACK UP IN BACK UP IN BACK UP SW BACK UP OUT BACK UP OUT S201 IF-834 (2/2) EVI-D100/EVI-D100P...

  • Page 96: Mdr-16

    CONVERTER TXD OUT RXD OUT C OUT CN1101 20P Y OUT MUTE REGUL- +5.0V WAKE UP VBS OUT ATOR RESET IC1103,Q1111 IC1102 REGUL- +3.3V ATOR VBS OUT Y OUT C OUT 8.6V 8.6V 8.6V 8.6V MDR-16 (1/3) 6-10 6-10 EVI-D100/EVI-D100P...
  • Page 97 PAN HALL H3 PAN PHASE V PAN PHASE W PAN HALL H1 PAN MR FG1 PAN HALL H2 PAN HALL H3 PAN MR FG2 PAN MR FG1 PAN MR FG2 IC1115 IC1120 IC1125 BUFFER BUFFER MDR-16 (2/3) 6-11 6-11 EVI-D100/EVI-D100P...
  • Page 98 PH1401, 1402 TILT HALL H1 CN1104 4P CN1401 4P TILT HALL H2 3.3V TILT HALL H3 PHOTO PAN R DET TILT MR FG1 INTERRUPTER PAN L DET TILT MR FG2 TILT UP DET TILT DOWN DET MDR-16 (3/3) 6-12 6-12 EVI-D100/EVI-D100P...
  • Page 99 PAN MR FG1 TILT HALL H1 TILT HALL H2 PAN MR FG2 TILT HALL H3 TILT MR FG1 TILT MR FG2 IC1304 TILT UP DET IC1301 IC1302 TILT DOWN DET IC1308 PHOTO PHOTO BUFFER BUFFER INTERRUPTER INTERRUPTER IC1307 MDR-17 6-13 6-13 EVI-D100/EVI-D100P...

  • Page 100: Schematic Diagrams

    ! sont critiques ! are critical for safety. pour la sécurité. Ne les remplacer que par une Replace only with part number piéce portant le numéro spécifié. specified. CRT picture frame Fig. b (Picture on monitor TV) 6-14 6-14 EVI-D100/EVI-D100P...

  • Page 101: Frame

    ZOOM_B MC-134 BOARD 2.0V ZOOM_A DD_ON 13 DD_ON ZOOM_B CAM_DD_ON CAM_DD_ON BACK_UP BACK_UP FOCUS_A WAKE_UP WAKE_UP FOCUS_B XVISCA_RESET FOCUS_A XVISCA_RESET FOCUS_B D8994 SCK2 TEMP_OUT SCK2 TEMP_COMP ZOOM_RST CAM_Y CAM_Y FOCUS_RST SENS_VCC CAM_C CAM_C CN701 Frame (1/2) LANC 6-15 6-15 EVI-D100/EVI-D100P...
  • Page 102 TILT HALL H2 MDR-17 BOARD TILT HALL H3 TILT HALL H3 GND (3.3V) GND (3.3V) 5V (MR) 5V (MR) 1-681-761-11 TILT MR FG1 TILT MR FG1 A-0211-132-A GND (MR) GND (MR) TILT MR FG2 TILT MR FG2 Frame (2/2) 6-16 6-16 EVI-D100/EVI-D100P...
  • Page 103 CD-336 CD-336 L5905 CN001 R002 C003 0.1u C004 4.7u GND 10 VSHT 11 -7.0V 12 15V 13 L001 Q001 GND 14 100uH 2SC4178-F13F14-T1 CCD_OUT 15 GND 16 C001 C002 4.7u R001 4700 CD-336 6-17 6-17 EVI-D100/EVI-D100P...
  • Page 104 3300 R312 PAL:1k R303 R306 R308 3300 C320 IC302 PAL:1K 4.7u R313 CXA1409AQ-T4 C313 1u B 1608 [ NT/PAL ] NTSC L302 68uH 47uH ±5% ±5% 47uH L304 68uH ±5% ±5% R303 3300 R316 3300 DD-161/161P (1/2) 6-18 6-18 EVI-D100/EVI-D100P...
  • Page 105 L505 4.7uH XVISCA_RESET 4.9V 10 CAM_DD_ON C504 C505 C506 C503 C507 WAKE_UP 2.2u 2.2u 3.3u 4.7u 4.7u BACK_UP 2012 3216 2012 3216 MUTE WAKE_UP XVISCA_RESET SCK2 CAM_Y CAM_C CAM_C MUTE CAM_Y VIDEO_OUT 4.9V Y_OUT C_OUT DD-161/161P (2/2) 6-19 6-19 EVI-D100/EVI-D100P...
  • Page 106 TXD OUT D111 GND (5V) MA3130WA-TX RXD OUT Y-OUT FB115 GND (5V) C-OUT C_OUT GND (S) Y_OUT D112 GND (S) MA3130WA-TX FB116 VBS OUT GND (S) PIN CONNECTOR CN104 1-785-549-41 D113 GND (5V) MA3130WA-TX IF-834 GND (5V) 6-20 6-20 EVI-D100/EVI-D100P...
  • Page 107 C411 0.01u 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 C403 C417 C405 1u B 0.01u 0.01u 1608 TO C413 IRIS_COM 6.3V ZM_RST FC_RST DIR1B DIR1A DIR0B DIR0A MC-134 (1/4) 6-21 6-21 EVI-D100/EVI-D100P...
  • Page 108 R609 47k MEM_VD LENS_RST_LED MECHA_HD ZM_RST_SENS MECHA_FLD FC_RST_SENS MECHA_VD (OSCI) GND C606 0.1u XSG_V_RST (OSCO) NC XWE_EEPROM XTBC_V_RST XCS_EEPROM XRST_TANUKI F_BUSY XVC_SCK VC_SO VC_SI XCS_TANUKI R604 R605 4700 470k IC601 AK6480AM-E2 R602 XSCK xBUSY 100k MC-134 (2/4) 6-22 6-22 EVI-D100/EVI-D100P...
  • Page 109 32KHZ_IN HI_SO INT_EXT HI_SI SYS_V XCS_VC TO C714 4.9V R708 100k R730 100k R719 R709 100k TO R724 XX R729 100k R710 100k R711 X701 R728 100k XOSD_SCK 20MHz OSD_SO C712 XCS_OSD 0.022u R731 470k MC-134 (3/4) 6-23 6-23 EVI-D100/EVI-D100P...
  • Page 110 VC_SO XCS_TANUKI XCS_TANUKI XRST_TANUKI XRST_TANUKI OSD_SO 17 OSD_SO XCS_OSD XCS_OSD XOSD_SCK XOSD_SCK XSYS_RST XSYS_RST IRIS_COM IRIS_COM EN1 12 DIR1B DIR1B DIR1A DIR1A DIR0B DIR0B DIR0A DIR0A ZM_RST ZM_RST FC_RST FC_RST CAM_Y CAM_Y CAM_C CAM_C MC-134 (4/4) CN751 6-24 6-24 EVI-D100/EVI-D100P...
  • Page 112 R1112 R1113 R1114 R1115 R1116 C1110 10uF C1115 10uF 10uF 0.22uF 22uF 22uF MA3130WA-TX 4.7k 4.7k 2.2k 2.2k 220pF 0.022uF 0.01uF (1608) 0.1uF IC1103 TL431CPK-E2 Connector for Flash 1774-710-41 CN1103 GND (3.3V) RESET GND (3.3V) MPC VCC 6-26 6-26 EVI-D100/EVI-D100P...
  • Page 113 S-80828ALUP-EAR-T2 24 25 PC7/A7 VCC5 %PB0 CL1118 PB0/A8 PF7/CLK %PB1 C1138 R1159 PB1/A9 VSS7 10pF %PB2 X1101 PB2/A10 EXTAL D1113 C1139 MA111-TX 10pF RECIEVE L RECIEVE R RECIEVE L RECIEVE R PB3/A11 XTAL 20MHz IC1101 L1116 10uH VSS2...
  • Page 114 6.3V C1311 IC1301 (1/2) 0.01uF TC7SH04FU-TE85R X-COM IN1A OUT1A Y-COM IN1B IN2A OUT1B Z-COM IN2B OUT2A C1306 OUT2B PH1301 PH1302 0.01uF GP1S092HCPI GP1S092HCPI R1312 R1308 R1311 R1305 C1314 IC1301 (2/2) TC7SH04FU-TE85R 0.01uF C1307 0.01uF C1304 0.01uF MDR-17 6-28 6-28 EVI-D100/EVI-D100P...
  • Page 115 GND(3.3V) R1402 R1404 SIRCS Category 1 SIRCS Category 2 GND(3.3V) BACK UP IN BACK UP OUT R1401 R1403 R201 R202 PH1401 PH1402 GP1S092HCPI GP1S092HCPI S201 CN1401 3.3V SW-1074 PAN R DET PAN L DET GND (3.3V) SE-616 6-29 6-29 EVI-D100/EVI-D100P...
  • Page 116 S/H AGC A/D CAM/VIDEO PBLK PB/REC CLPOB MODE1 XSHP MODE2 XSHD C127 VTRBYP 0.1u CLPDM CMLEVEL C128 0.1u C126 470p C118 0.1u C125 C119 C121 C124 0.1u 0.22u 0.1u 0.1u 1608 VC-266/266P (1/3) C122 C123 0.01u 0.01u 6-30 6-30 EVI-D100/EVI-D100P...
  • Page 117 XVC_SCK XVC_SCK VC_SO VC_SO XCS_TANUKI XCS_TANUKI XRST_TANUKI XRST_TANUKI OSD_SO OSD_SO XCS_OSD XCS_OSD XOSD_SCK XOSD_SCK XSYS_RST XSYS_RST IRIS_COM IRIS_COM DIR1B DIR1B DIR1A DIR1A DIR0B DIR0B DIR0A DIR0A ZM_RST ZM_RST FC_RST FC_RST CAM_Y CAM_Y CAM_C CAM_C VC-266/266P (2/3) L9097 6-31 6-31 EVI-D100/EVI-D100P...
  • Page 118 C202 FB203 Y_RF_IN CMO2 1608 C204 C213 TO AVDD CMI2 CMDCT BLKA 0.01u AVDD CMO1 XSYS_RST AMPO CMI1 1608 BLKB XCS_OSD DVSS5 TEST XOSD_SCK BLKC OSD_SO R213 100k C210 C211 100k C208 R212 0.01u 1608 VC-266/266P (3/3) 6-32 6-32 EVI-D100/EVI-D100P...

  • Page 119: Board Layouts

    C004 C311 C003 R308 R305 R306 C001 L302 C503 C505 C507 L304 C301 R304 C322 C002 FL301 CD-336 CD-336 DD-161/161P DD-161/161P -A SIDE- -B SIDE- -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 6-33 6-33 EVI-D100/EVI-D100P...
  • Page 120 R101 D101 D109 CN108 D105 D103 D102 CN102 CN101 IF-834 -A SIDE- SUFFIX: -11 CN107 R106 FB108 R103 D107 FB106 FB114 R101 R105 FB110 D101 D109 CN108 D105 D103 D102 CN102 CN101 IF-834 -A SIDE- SUFFIX: -11 6-34 6-34 EVI-D100/EVI-D100P...
  • Page 121 R723 R725 C712 R726 R708 R711 R727 R709 R719 R710 IC702 R724 L601 X701 L701 C715 R731 R732 C713 R728 IC701 R729 R730 X702 R735 CN702 C714 MC-134 MC-134 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 6-35 6-35 EVI-D100/EVI-D100P...
  • Page 122 D1103 D1101 D1102 L1113 R1168 IC1116 IC1115 L1102 R1173 C1157 Q1111 R1171 R1178 C1156 R1179 C1187 R1183 C1120 R1225 IC1125 CN1101 CN1107 CN1105 CN1106 R1226 C1119 R1177 MDR-16 MDR-16 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 6-36 6-36 EVI-D100/EVI-D100P...
  • Page 123 C1312 C1313 IC1301 CN1301 MDR-17 MDR-17 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 R1305 R1312 R1308 R1306 R1302 IC1302 IC1308 C1321 IC1303 C1312 C1313 IC1301 CN1301 MDR-17 MDR-17 -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 6-37 6-37 EVI-D100/EVI-D100P...
  • Page 124 -A SIDE- -B SIDE- -A SIDE- SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 R1403 R1402 S201 S202 R1404 CN1401 R1401 R202 R201 CN201 SE-616 SE-616 SW-1074 -A SIDE- -B SIDE- -A SIDE- SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 6-38 6-38 EVI-D100/EVI-D100P...

  • Page 125: Vectorscope Scale

    R110 IC106 C101 R202 R201 C115 C107 C121 C126 R203 R210 IC105 R108 C118 C108 R104 C124 C106 R105 C134 FB103 CN101 L103 C113 C111 L101 R107 VC-266/266P VC-266/266P -A SIDE- -B SIDE- SUFFIX: -11 SUFFIX: -11 6-39 6-39 EVI-D100/EVI-D100P...
  • Page 127 20 V AC range are suitable. (See Fig. A) To Exposed Metal Parts on Set 0.15 µ F 1.5 k Z voltmeter (5.25V) Earth Ground Fig A. Using an AC voltmeter to check AC leakage. EVI-D100/EVI-D100P...
  • Page 128 EVI-D100 (UC) EVI-D100C (SY) EVI-D100CP (CE) EVI-D100P (CE) Printed in Japan Sony Corporation EVI-D100P (CN) E 2010. 3 32 9-955-309-03 ©2001...

This manual is also suitable for:

Evi-d100cEvi-d100cpEvi-d100p

Table of Contents