Table of Contents
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
E
TRANSPORT, HANDLING AND STORAGE
WARNING
Refer to "WARNING and Safety
Information".
E.1
Handling
E.1.1
Procedures for handling operations
Before lifting:
• send all operators to a safe position and prevent persons
from entering the handling area;
• make sure the load is stable;
• make sure no material can fall during lifting. Manoeuvre
vertically in order to avoid impacts;
• handle the machine, keeping it at minimum height from the
ground.
E.1.2
Placing the load
Remove the appliance from the wooden pallet, move it to one
side, then slide it onto the floor.
E.2
Unpacking
IMPORTANT
Immediately check for any damage caused during
transport. Inspect the packaging before and after
unloading.
Remove the packaging. Take care when unpacking and
handling of the appliance to not cause any shocks on itself.
NOTE!
• The forwarder is responsible for the goods
during transport and delivery.
• Make a complaint to the forwarder in case of
visible or hidden damage.
• Specify any damage or shortages on the dis-
patch note.
• The driver must sign the dispatch note: the
forwarder can reject the claim if the dispatch
note is not signed (the forwarder can provide
the necessary form).
Unpack the machine carrying out the following operations:
• cut the straps and remove the protective film, taking care
not to scratch the surface if scissors or blades are used;
• remove the cardboard top, the polystyrene corners and the
vertical protection pieces;
F
INSTALLATION AND ASSEMBLY
WARNING
Refer to "WARNING and Safety
Information"
22
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
The Manufacturer declines any liability for inaccuracies con-
tained in the manual, if due to printing or translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
• for appliances with stainless steel cabinet, remove the
protective film very slowly without tearing it, to avoid leaving
glue stuck to the surface;
• should this happen, remove the traces of glue with a non-
corrosive solvent, rinsing it off and drying thoroughly;
• it is advisable to go over all the stainless steel surfaces with
a rag soaked in paraffin oil in order to create a protective film.
E.2.1
Disposal of packing
The packing must be disposed of in compliance with the
current regulations in the country where the appliance is used.
All the packing materials are environmentally friendly.
They can be safely kept, recycled, or burned in an appropriate
waste incineration plant. Recyclable plastic parts are marked
as follows:
Polyethylene
• Outer wrapping
• Instructions bag
Polypropylene
• Straps
Polystyrene foam
• Corner protectors
The parts in wood and cardboard can be disposed of,
respecting the current regulations in the country where the
machine is used.
E.3
Storage
The appliance and/or its parts must be stored and protected
from damp, in a non-aggressive place, free of vibrations and
with room temperatures between -10℃ [14℉] and 50℃
[122℉] .
The place where the appliance is stored must have a flat
support surface to avoid deforming the appliance or damage to
the support feet.
CAUTION
The appliance must be levelled, otherwise
its operation could be affected.
F.1
Introduction
To ensure correct operation of the appliance and maintain safe
conditions during use, carefully follow the instructions given
below in this section.
Table of Contents
